Internal Revenue Manual
IRM 2.3.28 — Command Code FTDPN
Part 2. Information Technology
Chapter 3. IDRS Terminal Responses Section 28. Command Code FTDPN 2.3.28 Command Code FTDPN Manual Transmittal December 23, 2024 Purpose (1) This transmits revised IRM 2.3.28, IDRS Terminal Responses, Command Code FTDPN. Material Changes (1) IRM 2.3.28.7 Added Federal Holidays for 2026. (2) Updated internal controls. (3) Change of W&I to TS. Effect on Other Documents IRM 2.3.28, dated November 11, 2023, is superseded. Audience LMSB, SB/SE, TE/GE, TS. Effective Date (12-23-2024) Rajiv Uppal Chief Information Officer
Program Scope and Objectives
2.3.28.1 (12-23-2024) Program Scope and Objectives Purpose:Command Code FTDPN is used by IRS employees as a calculator for manually computing FTD penalty . Audience: All IRS business areas Program Owner: Customer Service Primary Stakeholders:– Taxpayer Service (TS), Large Business and International (LB&I), Small Business Self-Employed (SB/SE), Tax Exempt and Government Entities (TE/GE), and Enterprise Operations (EOPS) Program Goals: This system manages data that was extracted from the Corporate Account Data Stores (BMF) allowing IRS employees to take specific actions on taxpayer account issues, track status.
Background
2.3.28.1.1 (01-01-2023) Background Command Code FTDPN is used by IRS employees as a calculator for manually computing FTD penalty
Authority
2.3.28.1.2 (01-01-2023) Authority IRM 20.1, Penalty Handbook, provides guidance to all areas of the IRS for all civil penalties imposed by the Internal Revenue Code (IRC). It sets forth general policy and procedural requirements for assessing and abating penalties, and it contains discussions on topics such as criteria for relief from certain penalties.
Responsibilities
2.3.28.1.3 (01-01-2023) Responsibilities The Director, Business Support, is the director responsible for the servicewide civil penalty program. The Director, Internal Management, is the director responsible for the IDRS Command Code. Overall responsibility for civil penalty programs is assigned to OSP. OSP is a matrix organization residing in the Business Support (Small Business/Self Employed) Function. OSP is charged with coordinating policy and procedures concerning the civil penalty program administration, ensuring consistency with the penalty policy statement, reviewing and analyzing penalty information, researching penalty effectiveness on compliance trends, and determining appropriate action necessary to promote voluntary compliance. Each and every taxpayer has a set of fundamental rights when dealing with IRS as provided in the Taxpayer Bill of Rights (TBOR). All employees handling penalty cases must do so in accordance with the TBOR as listed in IRC 7803(a)(3). The TBOR can also be found at Taxpayer Bill of Rights on irs.gov
Program Management and Review
2.3.28.1.4 (01-01-2023) Program Management and Review Every function in the IRS has a role in proper penalty administration. It is essential that each function conduct its operations with an emphasis on promoting voluntary compliance. Appropriate business reviews should be conducted to ensure consistency with the penalty policy statement (Policy Statement 20-1) and philosophy. Attention should be directed to penalty program coordination between offices and functions to make sure that approaches are consistent and penalty information is used for identifying and responding to compliance problems.
Program Controls
2.3.28.1.5 (01-01-2023) Program Controls SACS controls all the IDRS user accesses and permissions.
Terms/Definitions/Acronyms
2.3.28.1.6 (01-01-2023) Terms/Definitions/Acronyms Commonly used acronyms used within this IRM Acronyms Acronym Definition BTIF Business Taxpayer Information File FTD Failure to Deposit
Related Resources
2.3.28.1.7 (12-23-2024) Related Resources IRM 20.1.1, Penalty Handbook, Introduction and Penalty Relief 2.3.29 - IDRS Terminal Responses - Command Codes INTST, ICOMP and COMPA 2.4.43 - IDRS Terminal Responses - Command Code PINEX 2.3.41 - IDRS Terminal Responses - Command Code PIEST 2.3.43 - IDRS Terminal Responses - Command Code PIFTF
Overview of Command Code FTDPN
2.3.28.2 (01-01-2023) Overview of Command Code FTDPN Command Code FTDPN is used by IRS employees as a calculator for manually computing FTD penalty. A tabbing feature is available within the command code which enables the user to go from field to field without having to space over each position. Command Code FTDPN will now allow computation of FTD penalty on liabilities between 100,000.00 and 99,999,999.99 for tax periods 199303 and subsequent. For tax periods 199303 and subsequent, CC FTDPN will now allow the user the option of altering credits for the purposes of FTD penalty computation. A credits screen, after the liability screen on the computation, will display the credits from the tax module. The user may alter the amounts, the dates of the transactions and the transaction codes. A new computation will be displayed computing FTD penalty with the new credits. The program will combine like transaction codes dated the same day. For tax periods 199303 and subsequent, CC FTDPN will allow the user the option of changing the BASE-PERIOD-CD and the STATE-CD for computation purposes via FTDPNA and FTDPNB screens. FTD penalty will be computed under the deposit requirements of the altered BASE-PERIOD-CD and consider the holidays of the new STATE-CD. For tax periods 199303 and subsequent, federal and local state holidays will not be considered banking days in computing FTD penalty. Only federal holidays will not be considered business days when computing FTD. The liability and credit screens you will be able to enter amounts larger than 99,999,999.99 with one significant decimal point (Example 199,999,999.9). Note: Due to space limitations when displaying liabilities and credits greater than 99,999,999.99 there will only be one decimal place displayed. The averaging of liabilities will now be able to handle up to 999,999,999.99.
CC FTDPN with a definer A
2.3.28.3 (01-01-2007) CC FTDPN with a definer A Command Code FTDPN with a definer of A, will result in an FTDPNB input screen display format. The user then inputs the period liabilities and debit amounts for the specific tax module. the TIN, MFT and TAX PERIOD do not need to be entered if the prior command code was TXMOD. For tax periods prior to 199212, if a quarter liability amount is input (for averaging) it is divided by 12, rounded, and displayed on Page 2 of FTDPNB output at period letters B, D, F, H, J, L, N, P, R, T, V, and X. When in a MONTHLY deposit status and there is no line 20 money amounts, but there is a schedule B, then accumulate each month's money amounts and make the due date of each month's total the 15th of the following month. when in a SEMI-WEEKLY deposit status and there is line 20 money amounts, but no schedule B, then divide each of the three money amounts by four and place the result in the first four Wednesdays of each month and compute the penalty. Fields may also be changed and re-entered using FTDPNB.
Average Liability Amount
2.3.28.3.1 (01-01-2007) Average Liability Amount For tax periods after 199212 and the liability is to be averaged, and there is no valid schedule B or line 20 money amounts on the return: For Form 941, a SEMI-WEEKLY depositor, the total tax amount is divided by 12 with the result displayed on the first four Wednesdays of each month. For Form 943 and Form 945, a SEMI-WEEKLY depositor, the total tax amount is divided by 48 with the result displayed on the first four Wednesdays of each month. For a MONTHLY depositor, divide the total tax amount by 3 and set monthly due dates for Form 941 and divide the total tax amount by 12 and set monthly due dates for Form 943 and Form 945.
CC FTDPN with a definer Blank
2.3.28.4 (01-01-2007) CC FTDPN with a definer Blank Command Code FTDPN with a blank definer will result in a multiple screen FTDPNB response. These screens display the liabilities from the posted return on the TIF and the FTD penalty computation calculated by the command code. This eliminates the need to manually input the liabilities. If the user wishes to change any of these liabilities, the entry code must be entered either by keying down to an unused line or by keying to the right of the required data on the last significant line. The program will then re-compute the FTD penalty based on the new liability amounts. When overlaying the liabilities, the user has the option of either right or left justifying the liability amounts.
CC FTDPN with a definer G
2.3.28.5 (01-01-2007) CC FTDPN with a definer G CC FTDPN with definer "G" is used to allow User(s) to compute Form 941, Form 943, Form 945, Form 940, Form CT-1, Form 1042, and Form 944. Generic Account. Authorized User(s) does not need any account on TIF Data Base to compute FTD penalty. IF CC FTDPN with "G" definer is input correctly, a new literal " GENERIC ACCOUNT:" on the 2nd line of the FTDPNB Liability and Credit Screens will be displayed. This will remind user(s) that the CC FTDPN is using a Generic Account and all liabilities and credits will need to be keyed in for computation.
CP 568 FTD Notice
2.3.28.6 (01-01-2008) CP 568 FTD Notice For tax periods 199303 and subsequent, CC FTDPN will have an option that allows user to request an FTD Letter. (Please refer to the Users Guide for the CP 568 FTD Notice Requests through IDRS CC FTDPN.) For tax periods 199303 and subsequent, CC FTDPN will now allow users the option to review or view CP568 letter request on the screen before deciding to print. CC FTDPN will also display a new informational screen every time users request a letter. This screen lists all Paragraph Codes available when generating a CP568 Letter. In addition, new Paragraph Codes (211 and 212) have been added. Paragraph Code 211, allows users to create an open text on cover letter while Paragraph 212, creates an open text as part of the explanation pages. Once a user inputs one of these Paragraph Codes, an FTDPNB Text Screen is displayed. This screen will allow users to input up to 15 lines of open text exactly as it appears on the letter. Note, the open text can also be viewed as part of the letter via on-line view function. Note: This review function can be only applied for Form 941. Start from tax period 200612, CC FTDPN for Form 945 and start from tax period 200812 for Form 944 will allow users the option to review or view CP568 letter request on the screen before deciding to print. Once a user input View function on the view page, the standard paragraph and all explanation pages will be displayed on the screen. The user then can select the paragraph code to print on the letter.
Federal and State-Banking Holidays
2.3.28.7 (12-23-2024) Federal and State-Banking Holidays The following table lists state-banking holidays for 1993. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AL. Feb 23, Apr 26, Jun 7; AK. Mar 29, Oct 18; CA. Feb 12, Apr 9, Sep 9; CT. Feb 12; Apr 9; DE. Apr 9, Nov 26; GA. Apr 26; HI. Mar 26, Apr 9, Jun 11; Aug 20, Nov 2; IL. Feb 12, Mar 1, Apr 9; IN. Apr 9, Nov 26; Dec 23; IA. Feb 12, Nov 26; KY. Jan 29; LA. Mar 2, Apr 9; Nov 26; ME. Apr 19; MD. Jan 15; MA. Mar 17, Apr 19, Jun 17; MI. Feb 8; MS. Apr 26; MO. Feb 12; NE. Nov 26; NV. Nov 1, Nov 26; NH. Apr 26; NY. Feb 12, Nov 2; NC. Apr 9; ND. Apr 9; OK. Nov 26; PA. Apr 9, Jun 14, Nov 2; RI. Nov 2; SC. Nov 2, Nov 26; TN. Apr 9; UT. Jul 23; VT. Feb 2; WA. Feb 12, Feb 22; WV. Feb 12, May 11, Nov 2; NOTE: The following states do not have a state banking holiday in 1993: AR., AZ., CO., DC., FL., ID., KS., MN., MT., NJ., NM., OH., OR., SD., TX., VA., WI., WY. NOTE: This list does not include Federal holidays, however Federal holidays will also be state banking holidays. NOTE: For FTD penalty computation purposes, Inauguration Day (1/20), will be counted as a Federal holiday. NOTE: If state code is "MU" , the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following is a list of state-banking holidays for 1994. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AL. Feb 15, Apr 25, Jun 6; AK. Mar 28, Oct 18; AR. Dec 23; CA. Apr 1, Sep 9; CO. Aug 1; CT. Feb 11, Apr 1; DE. Apr 1, Nov 25; GA. Apr 25; HI. Mar 25, Apr 1, Jun 10, Aug 19, Nov 8; IL. Feb 11, Mar 7; IN. Feb 11, Apr 1, Nov. 25, Dec 27; IA. Feb 11, Nov 25; LA. Feb 15, Apr 1, Nov 25; MA. Mar 17, Apr 25, Jun 17; MD. Feb 11, Mar 25, Apr 1, Sep 12; ME. Apr 25; MI. Feb 11; MS. Apr 25; MO. Feb 11; NV. Oct 31, Nov 25; NY. Feb 11, Nov 8; NC. Apr 1; ND. Apr 1; OK. Nov 25; PA. Apr 1, Jun 14, Nov 8; RI. Nov 8; SC. Nov 8, Nov 25; TN. Apr 1; UT. Jul 25; VT. Feb 11, Mar 1; WA. Feb 11; WV. Feb 11, May 10, Nov 8; NOTE: The following are Federal holidays for 1994. All state banking institutions will also be closed on these days. Dec 31, 1993, Jan 17, Feb 21, May 30, Jul 4, Sep 5, Oct 10, Nov 11, Nov 24, Dec 26, Jan 2, 1995 NOTE: The following states do not have a state banking holiday in 1994: AZ., DC., FL., ID., KS., KY., MN., MT., NE., NH., NJ., NM., OH., OR., SD., TX., VA., WI., WY. NOTE: If state code is "MU" , the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 1995. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AL. Feb 7, Feb 15, Apr 24, Jun 5; AK. Mar 27, Oct 18; CA. Apr 14, Sep 8; CO. Aug 7; CT. Feb 13, Apr 14; DE. Apr 14, Nov 24; GA. Apr 24; HI. Mar 27, Apr 14, Jun 12, Aug 18; IL. Feb 13, Mar 6; Apr 14; Nov. 7; IN. Apr 14, Nov 24; IA. Apr 14, Nov 7, Nov 24; MA. Apr 17; MD. Feb 13, Mar 24, Apr 14, Sep 12; ME. Apr 17; MI. Apr 24; MS. Apr 24; MO. May 8; NV. Oct 31, Nov 24; NY. Feb 13, Nov 7; NC. Apr 14; ND. Apr 14; PA. Feb 13, Apr 14, Jun 14, Nov 7; RI. May 4, Aug 14, Nov 7; TN. Apr 14, Aug 3, Nov 7; UT. Jul 24; WA. Feb 13; WV. Feb 13, Jun 20, Nov 7; NOTE: The following are Federal holidays for 1995. All state banking institutions will also be closed on these days. Jan 2, Jan 16, Feb 20, May 29, Jul 4, Sep 4, Oct 9, Nov 10, Nov 23, Dec 25, Jan 1, 1996 NOTE: The following states do not have a state banking holiday in 1995: AZ., AR., DC., FL., ID., KS., KY., LA., MN., MT., NE., NH., NJ., NM., OH., OK., OR., SC., SD., TX., VT., VA., WI., WY. NOTE: If state code is "MU" , the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 1996. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AL. Feb 20, Apr 22, Jun 3; AK. Mar 25, Oct 18; AR. Dec 24; CA. Apr 5, Sep 9; CO. Aug 5; CT. Feb 12, Apr 5; DE. Apr 5, Nov 29; GA. Apr 22; HI. Mar 26, Apr 5; June 11, Aug 16 ; IL. Feb 12, Mar 4; Apr 5; Nov. 5; IN. Apr 5, Nov. 29, Dec 24; IA. Apr 5, Nov 5, Nov 29, Dec 24; MA. Apr 15; MD. Feb 12, Mar 25, Apr 5, Sep 12; ME. Apr 15; MI. Apr 29; MS. Apr 22; MO. May 8; NV. Oct 31, Nov 29; NY. Feb 12; NC. Apr 5; ND. Apr 5; PA. Feb 12, Apr 5, Jun 14, Nov 5; RI. Aug 12, Nov 5; TN. Apr 5, Aug 1, Nov 5; UT. Jul 24; WA. Feb 12; WV. Feb 12, Jun 20, Nov 5; NOTE: The following are Federal holidays for 1996. All state banking institutions will also be closed on these days. Jan 1, Jan 15, Feb 19, May 27, Jul 4, Sep 2, Oct 14, Nov 11, Nov 28, Dec 25, Jan 1, 1997 NOTE: The following states do not have a state banking holiday in 1996: AZ., DC., FL., ID., KS., KY., LA., MN., MT., NE., NH., NJ., NM., OH., OK., OR., SC., SD., TX., VT., VA., WI., WY. NOTE: If state code is "MU" , the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 1997. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AL. Feb 11, Apr 28, Jun 2; AK. Mar 31, Oct 17; AR. Dec 24; CA. Mar 28, Sep 9; CO. Aug 4; CT. Feb 12, Mar 28; DE. Mar 28, Nov 28; GA. Apr 28; HI. Mar 26, Mar 28; June 11, Aug 15; IL. Feb 12, Mar 3, Mar 28, Nov. 4; IN. Mar 28, Nov 28, Dec 24; IA. Mar 28, Nov 4, Dec 24; MA. Apr 21; MD. Feb 12, Mar 25, Mar 28, Sep 12; ME. Apr 21; MI. Apr 28; MS. Apr 28; MO. May 8; NV. Oct 31, Nov 28; NY. Feb 12, Nov 4; NC. Mar 28; ND. Mar 28; PA. Feb 12, Mar 28, Jun 13, Nov 4; RI. May 5, Aug 11, Nov 4; TN. Mar 28, Aug 7, Nov 4; UT. Jul 24; WA. Feb 12; WV. Feb 12, Jun 20, Nov 4; NOTE: The following are Federal holidays for 1997. All state banking institutions will also be closed on these days. Jan 1, Jan 20, Feb 17, May 26, Jul 4, Sep 1, Oct 13, Nov 11, Nov 27, Dec 25 NOTE: The following states do not have a state banking holiday in 1997: AZ., DC., FL., ID., KS., KY., LA., MN., MT., NE., NH., NJ., NM., OH., OK., OR., SC., SD., TX., VT., VA., WI., WY. NOTE: If state code is "MU" , the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 1998. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AL. Feb 24, Apr 27, Jun 1; AK. Mar 30, Oct 19; AR. Dec 24; CA. Feb 12, Apr 10, Sep 9; CO. Aug 3; CT. Feb 12, Apr 10; DE. Apr 10, Nov 27; GA. Jan 19, Apr 27 HI. Mar 26, Apr 10; Jun 11, Aug 21, Nov 3; IL. Feb 12, Mar 2, Apr 10, Nov. 3; IN. Apr 10, Nov 27, Dec 24; IA. Apr 10, Nov 3, Dec 24; MA. Apr 20; MD. Feb 12, Mar 25, Apr 10, Sep 11; ME. Apr 20; MI. Apr 28; MS. Apr 27; MO. Feb 12, May 8; NV. Oct 30, Nov 27; NY. Feb 12, Nov 3; NC. Apr 10; ND. Apr 10; PA. Feb 12, Apr 10, Jun 15, Nov 3; RI. May 4, Aug 10, Nov 3; SC. Nov 3, Nov 27; TN. Apr 10, Aug 6, Nov 3; UT. Jul 24; WA. Feb 12; WV. Feb 12, Nov 3; NOTE: The following are Federal holidays for 1998. All state banking institutions will also be closed on these days. Jan 1, Jan 19, Feb 16, May 25, Jul 3, Sep 7, Oct 12, Nov 11, Nov 26, Dec 25 NOTE: The following states do not have a state banking holiday in 1998: AZ., DC., FL., ID., KS., KY., LA., MN., MT., NE., NH., NJ., NM., OH., OK., OR., SD., TX., VT., VA., WI., WY. NOTE: If state code is MU, the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 1999. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AL. Feb 16, Apr 26, Jun 7; AK. Mar 29, Oct 18; CA. Feb 12; Apr 2, Sep 9; CO. Aug 2; CT. Feb 12, Apr 2; DE. Apr 2, Nov 26; GA. Jan 19, Apr 26; HI. Mar 26, Apr 2; Jun 11, Aug 20, Nov 2; IL. Feb 12, Mar 1, Apr 2, Nov. 2; IN. Apr 2, Nov 26; IA. Apr 2, Nov 2; MA. Apr 19; MD. Feb 12, Mar 25, Apr 2, Sep 13; ME. Apr 19; MS. Apr 26; MO. Feb 12, May 7; NV. Oct 1, Nov 26; NY. Feb 12, Nov 2; NC. Apr 2; ND. Apr 2; PA. Feb 12, Apr 2, Jun 14, Nov 2; RI. May 4, Aug 9, Nov 2; SC. Nov 2, Nov 26; TN. Apr 2, Aug 5, Nov 2; UT. Jul 23; WA. Feb 12; WV. Feb 12, Jun 21, Nov 2; NOTE: The following are Federal holidays for 1999. All state banking institutions will also be closed on these days. Jan 1, Jan 18, Feb 15, May 31, Jul 5, Sep 6, Oct 11, Nov 11, Nov 25, Dec 24, Dec 31. NOTE: The following states do not have a state banking holiday in 1999: AR., AZ., DC., FL., ID., KS., KY., LA., MI., MN., MT., NE., NH., NJ., NM., OH., OK., OR., SD., TX., VT., VA., WI., WY. NOTE: If state code is MU, the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 2000. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AL. Mar 7, Apr 24, Jun 5; AK. Mar 27, Oct 18; CA. Feb 11; Apr 21, Sep 8; CO. Aug 7; CT. Feb 11, Apr 21; DE. Apr 21, Nov 24; GA. Jan 19, Apr 24 HI. Mar 27, Apr 21; Jun 12, Aug 18, Nov 7; IL. Feb 11, Mar 6, Apr 21, Nov. 7; IN. Apr 21, Nov 24; IA. Apr 21, Nov 7; MA. Apr 17; MD. Feb 11, Mar 24, Apr 21, Sep 12; ME. Apr 17; MS. Apr 24; MO. Feb 11, May 8; NV. Oct 31, Nov 24; NY. Feb 11, Nov 7; NC. Apr 21; ND. Apr 21; PA. Feb 14, Apr 21, Jun 14, Nov 7; RI. May 4, Aug 14, Nov 7; SC. Nov 7, Nov 24; TN. Aug 21, Aug 3, Nov 7; UT. Jul 24; WA. Feb 11; WV. Jun 20, Nov 7; NOTE: The following are Federal holidays for 2000. All state banking institutions will also be closed on these days. Jan 1, Jan 18, Feb 15, May 31, Jul 5, Sep 6, Oct 11, Nov 11, Nov 25, Dec 24, Dec 31. NOTE: The following states do not have a state banking holiday in 2000: AR., AZ., DC., FL., ID., KS., KY., LA., MI., MN., MT., NE., NH., NJ., NM., OH., OK., OR., SD., TX., VT., VA., WI., WY. NOTE: If state code is MU, the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 2001. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AL. Feb27, Apr 23, Jun 4; AK. Mar 26, Oct 18; AR Dec 24 CA. Feb 12; Apr 13, Sep 10; CO. Aug 6; CT. Feb 12, Apr 13; DE. Apr 13, Nov 23; GA. Jan 19, Apr 23 HI. Mar 26, Apr 13; Jun 11, Aug 17, Nov 6; IL. Feb 12, Mar 5, Apr 13, Nov. 6; IN. Apr 13, Nov 23, Dec 24; IA. Apr 13, Nov 6,Dec 24; KY Feb 12,Jun 4; MA. Apr 16; MI Feb 5; MD. Feb 12, Mar 26, Apr 13, Sep 12; ME. Apr 16; MS. Apr 30; MO. Feb 12, May 8; NV. Oct 31, Nov 23; NY. Feb 12, Nov 6; NC. Apr 13; ND. Apr 13; PA. Feb 12, Apr 13, Jun 14, Nov 6; RI. May 4, Aug 13, Nov 6; SC. Nov 6, Nov 23; TN. Apr 13, Aug 2, Nov 6; UT. Jul 24; WA. Feb 12; WV. Feb 12, Jun 20, Nov 6; NOTE: The following are Federal holidays for 2001. All state banking institutions will also be closed on these days. Jan 1, Jan 21, Feb 18, May 27, Jul 4, Sep 2, Oct 14, Nov 11, Nov 28, Dec 25. NOTE: The following states do not have a state banking holiday in 2001: AZ., DC., FL., ID., KS., LA., MN., MT., NE., NH., NJ., NM., OH., OK., OR., SD., TX., VT., VA., WI., WY. NOTE: If state code is MU, the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering The following table lists state-banking holidays for 2002. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AL. Feb12, Apr 22, Jun 3; AK. Mar 25, Oct 18; AR Dec 24 CA. Feb 12; Mar 29, Sep 09; CO. Aug 5; CT. Feb 12, Apr 29; DE. Mar 29, Nov 29; GA. Jan 18, Apr 22 HI. Mar 26, Mar 29; Jun 11, Aug 16, Nov 5; IL. Feb 12, Mar 4, Mar 29, Nov. 5; IN. Mar 29, Nov 29, Dec 24; IA. Mar 29, Nov 5,Dec 24; KY Feb 12,Jun 3; MA. Apr 15; MI Feb 4; MD. Feb 12, Mar 25, Mar 29, Sep 12; ME. Apr 15; MS. Apr 29; MO. Feb 12, May 8; NV. Oct 31, Nov 22; NY. Feb 12, Nov 5; NC. Mar 29; ND. Mar 29; PA. Feb 12, Mar 29, Jun 14, Nov 5; RI. May 3, Aug 12, Nov 5; SC. Nov 5, Nov 29; TN. Mar 29, Aug 1, Nov 5; UT. Jul 24; WA. Feb 12; WV. Feb 12, Jun 20, Nov 5; NOTE: The following are Federal holidays for 2002. All state banking institutions will also be closed on these days. Jan 1, Jan 21, Feb 18, May 27, Jul 4, Sep 2, Oct 14, Nov 11, Nov 28, Dec 25. NOTE: The following states do not have a state banking holiday in 2002: AZ., DC., FL., ID., KS., LA., MN., MT., NE., NH., NJ., NM., OH., OK., OR., SD., TX., VT., VA., WI., WY. NOTE: If state code is MU, the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 2003. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AL. Feb 04, Apr 28, Jun 2; AK. Mar 24, Oct 17; AR Dec 24 CA. Feb 12; Mar 18, Sep 09; CO. Aug 4; CT. Feb 12, Apr 18; DE. Apr 18, Nov 28; GA. Jan 20, Apr 28 HI. Mar 26, Apr 18; Jun 11, Aug 15, Nov 4; IL. Feb 12, Mar 3, Apr 18, Nov. 4; IN. Apr 18, Nov 28, Dec 24; IA. Apr 18, Nov 4,Dec 24; KY Feb 12,Jun 2; MA. Apr 21; MI Feb 3; MD. Feb 12, Mar 25, Apr 18, Sep 12; ME. Apr 21; MS. Apr 28; MO. Feb 12, May 8; NV. Oct 31, Nov 28; NY. Feb 12, Nov 4; NC. Apr 18; ND. Apr 18; PA. Feb 12, Apr 18, Jun 16, Nov 4; RI. May 5, Aug 11, Nov 4; SC. Nov 4, Nov 28; TN. Apr 18, Aug 7, Nov 4; UT. Jul 24; WA. Feb 12; WV. Feb 12, Jun 20, Nov 4; NOTE: The following are Federal holidays for 2003. All state banking institutions will also be closed on these days. Jan 1, Jan 20, Feb 17, May 26, Jul 4, Sep 1, Oct 13, Nov 11, Nov 27, Dec 25. NOTE: The following states do not have a state banking holiday in 2003: AZ., DC., FL., ID., KS., LA., MN., MT., NE., NH., NJ., NM., OH., OK., OR., SD., TX., VT., VA., WI., WY. NOTE: If state code is MU, the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 2004. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AL. Feb 24, Apr 26, Jun 7; AK. Mar 29, Oct 18; AR Dec 23 CA. Feb 12; Mar 31, Apr 9, Sep 09; CO. Aug 2; CT. Feb 12, Apr 09; DE. Apr 09, Nov 26; GA. Apr 26, Nov 26; HI. Mar 26, Apr 09; Jun 11, Aug 20; IL. Feb 12, Mar 1, Apr 09, Nov 26; IN. Apr 09, Nov 26, Dec 23; IA. Apr 09, Nov 26; KY Feb 12,Apr 9,Jun 7,Nov 26; MA. Apr 19; MI Nov 26; MD. Feb 12, Mar 25, Apr 09, Sep 13; ME. Apr 19; MS. Apr 26; ID Apr 9, Nov 26; MO. Feb 12, May 7; LA Feb 24, Apr 9; NV. Nov 1, Nov 26; NY. Feb 12, Nov 2; NC. Apr 09, Nov 26; ND. Apr 09; NJ Apr 9; PA. Feb 12, Apr 09, Jun 14, Nov 2; RI. Aug 09, Nov 2; SC. Nov 2, Nov 26; TN. Apr 09, Nov 2; UT. Jul 23; WA. Feb 12; WV. Feb 12, Jun 21, Nov 2; NOTE: The following are Federal holidays for 2004. All state banking institutions will also be closed on these days. Jan 1, Jan 19, Feb 16, May 31, Jun 11, Jul 5, Sep 6, Oct 11, Nov 11, Nov 25, Dec 24. NOTE: The following states do not have a state banking holiday in 2004: AZ., DC., FL., KS., NE, NH., NM., OH., OK., OR., SD., TX., VA., WI., WY. NOTE: If state code is MU, the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 2005. These dates are used in computing Form 941, Form 943 and Form 945 penalty processing. AK. Mar 28, Oct 18; AL Feb 8, Apl 25, Jun 6; AR Dec 23; CA Mar 25, Mar 31, Sep 9, Nov 25; CO Aug 1; CT Feb 11, Mar 25; DE Mar 25,Nov 8, Nov 25; FL Nov 25; GA. Apr 25, Nov 25,Dec 23; HI. Mar 25, Jun 10, Aug 19; IA Mar 25, Nov 25,Dec 23; IL Feb 11, Mar 7, Mar 25, Nov 25; IN Mar 25, Nov 25,Dec 23; KS Nov 25; KY. Feb11, Mar 25,Jun 6, Nov 25; LA Feb 8, Mar 25, Nov 8; MA Apr 18; MD. Feb 11, Mar 25, Sep 12; ME Apr 18; MI Feb 11, Nov 25, Dec 23; MN Nov 25; MO Feb 11, May 09 MS Apr 25; NC Mar 25, Nov 25,Dec 23; ND Mar 25; NE Apr 25, Nov 25; NH Nov 25; NJ Feb 11, Mar 25, Nov 8; NM Feb 11, Nov 25; NV Oct 31, Nov25; NY Feb 11, Nov 8; OK Nov 25; PA. Mar 25, Jun 14, Nov 8, Nov 25; RI Aug 8, Nov 8; SC May 10, Nov 8, Nov 25; TN Mar 25, Nov 8; TX Jan 19, Mar 2, Nov 25, Dec 23; UT Jul 25; VT Feb 11, Aug 16; WA Feb 11; WI Mar 25; WV Feb 11, May 20, Nov 8; NOTE: The following are Federal holidays for 2005. All state banking institutions will also be closed on these days. Jan 17, Jan 20, Feb 21, May 30, Jul 4, Sep 5, Oct 10, Nov 11, Nov 24, Dec 26. NOTE: The following states do not have a state banking holiday in 2005: AZ., DC., ID., MT, OH., OR., SD., VA., WY. NOTE: If state code is MU, the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 2006. These dates are used in computing Form 940, Form 941, Form 943 and Form 945 penalty processing. AK. Mar 27, Oct 18; AL Feb 28, Apl 24, Jun 5; AZ Sep 18; CA Feb 13, Mar 31, Sep 8; CO CT Feb 13; DE Apr 14, Nov 24; FL Jan 19, Feb 13, Feb 15, Apr 3, Apr 14, May 26, Jun 2, Jun 14; GA. HI. Mar 27, Apr 14, Jun 12, Aug 18; IA Feb 13; IL Feb 13, Mar 6; IN Feb 13, Apr 14; KS Feb 13, Apr 14; KY. Jan 19, Jan 30, Feb13, Jun 2; LA Jan 9, Jan 19, Feb 28, Apr 14, Jun 2, Aug 30, Nov 1; MA Apr 17; MD. Feb 13, Mar 24, Apr 14, Oct 12; ME Apr 17; MI Feb 13; MT Feb 13; MO Feb 13, Apr 13; MS Apr 24; NC Jan 19, Mar 24, Apr 12, Apr 14, May 10, May 19, Oct 2; ND Apr 14; NE Apr 28; NH NJ Feb 13, Apr 14; NM Feb 13; NV Oct 31; NY Feb 13; OK Apr 13, Apr 21, Sep 15, Oct 10, Nov 3; PA. Apr 14, Jun 14; RI May 4, Aug 14; SC Nov 24, Dec 26; TN Mar 25, Nov 8; TX Jan 19, Mar 2, Apr 21,Jun 19, Aug 28, Nov 24, Dec 26; UT Jul 24; VT Feb 13, Aug 16; WA Nov 24;; WI Apr 14; WV Feb 13, Jun 20; NOTE: The following are Federal holidays for 2006. All state banking institutions will also be closed on these days. Jan 02, Jan 16, Feb 20, May 29, Jul 4, Sep 4, Oct 9, Nov 10, Nov 23, Dec 25. NOTE: The following states do not have a state banking holiday in 2006: AR., CO., DC., GA., ID., MN., NH, OH., OR., SD., VA., WY. NOTE: If state code is MU, the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 2007. These dates are used in computing Form 941, Form 943, Form 945, and Form 944 penalty processing. AK. Mar 26, Oct 18; AL Feb 20, Apl 30, Jun 4; AR Dec 24; AZ Sep 17 CA Feb 12, Mar 30, Sep 10; CT Feb 12; DE Apr 6, Nov 23; FL Jan 19, Feb 12, 15, Apr 2, Apr 6, May 25, Jun 4, 14; HI. Mar 26, Apr 6, Jun 11, Aug 17; IA Feb 12; IL Feb 12, Mar 5; IN Feb 12, Apr 6; KS Feb 12, Apr 6; KY. Jan 19, 30, Jun 4; LA Jan 8, 19, Feb 20, Apr 6, Jun 4, Aug 30 ,Nov 1; MA Apr 16; MD. Feb 12, Mar 26,Apr 6,Sep 12; ME Apr 16; MI Feb 12; MT Feb 12; MO Feb 12, Apr 13; MS Apr 30; NC Jan 19, Mar 26, Apr 6, Apr 12, May 10, May 21, Sep 21; ND Apr 6; NE Apr 27; NJ Feb 12, Apr 6; NM Feb 12; NV Oct 31; NY Feb 12; OK Apr 13, Apr 23, Sep 17, Oct 10, Nov 5; PA. Apr 6, Jun 14; RI May 4, Aug 13; SC Nov 23, Dec 26; TN Sep 24; TX Jan 19, Mar 2, Apr 20,Jun 19, Aug 27, Nov 23, Dec 24,Dec 26; UT Jul 24; VT Feb 12, Aug 16; WA Nov 23; WI Apr 6; WV Feb 12, Jun 20; NOTE: The following are Federal holidays for 2007. All state banking institutions will also be closed on these days. Jan 1, Jan 15, Feb 19, May 28, Jul 4, Sep 3, Oct 8, Nov 12, Nov 22, Dec 25. NOTE: The following states do not have a state banking holiday in 2007: CO., DC, ID., MN., NH., OH., OR., VA., WY., GA., SD. NOTE: If state code is MU, the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 2008. These dates are used in computing Form 941, Form 943, Form 945, and Form 944 penalty processing. AK. Mar 31, Oct 17; AL Feb 5, Apl 28, Jun 2; AR Dec 24; AZ Sep 17 CA Feb 12, Mar 31, Sep 9; CT Feb 12; DE Mar 21, Nov 28; FL Jan 18, Feb 12, 15, Mar 21, Apr 2, May 26, Jun 3, 13; HI. Mar 21, Mar 26, Jun 11, Aug 18; IA Feb 12; IL Feb 12, Mar 3; IN Feb 12, Mar 21; KS Feb 12, Mar 21; KY. Jan 18, 30, Feb 12, Jun 3; LA Jan 8, 18, Feb 5, Mar 21,Jun 3, Aug 29, ,Oct 31; MA Apr 21; MD. Feb 12, Mar 21, Mar 25, Sep 12; ME Apr 21; MI Feb 12; MT Feb 12; MO Feb 12, Apr 14; MS Apr 28; NC Jan 18, Mar 21, 25, Apr 11, May 9, May 20; ND Mar 21; NE Apr 25; NJ Feb 12, Mar 21; NM Feb 12; NV Oct 31; NY Feb 12; OK Apr 14, Apr 22, Sep 16, Oct 10, Nov 4; PA. Mar 21, Jun 13; RI May 5, Aug 11; SC Nov 28, Dec 26; TN Sep 22; TX Jan 18, Mar 3, Apr 21,Jun 19, Aug 27, Nov 28, Dec 24,Dec 26; UT Jul 24; VT Feb 12, Aug 15; WA Nov 28; WI Mar 21; WV Feb 12, Jun 20; NOTE: The following are Federal holidays for 2008. All state banking institutions will also be closed on these days. Jan 1, Jan 21, Feb 18, May 26, Jul 4, Sep 1, Oct 13, Nov 11, Nov 27, Dec 25. NOTE: The following states do not have a state banking holiday in 2008: CO., DC, ID., MN., NH., OH., OR., VA., WY., GA., SD. NOTE: If state code is MU, the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 2009. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing. State-Banking Holidays table for 2009. AK Mar. 30, Oct. 19 AL Feb. 24, Apr. 27, Jun. 1 AR Dec. 24 CA Feb. 12, Mar. 31, Apr. 10, Sep. 9 CO Aug. 3 CT Feb. 12, Apr. 10 DE Apr. 10, Nov. 27 FL Nov. 27 GA Apr. 27 HI Mar. 26, Apr. 10, Jun. 11, Aug. 21 IA Nov. 27 IL Feb. 12, Nov. 27 IN Feb. 12, Apr. 10 KS Nov. 27 KY Dec. 24 LA Feb. 24, Apr. 10 MA Apr. 20 MD Nov. 27 ME Apr. 20 MI Nov. 27 MN Nov. 27 MO Feb. 12, May 8 MS Apr. 27 NC Apr. 10, Nov. 27, Dec. 24 ND Apr. 10 NE Apr. 24, Nov. 27 NH Nov. 27 NJ Mar. 12, Apr. 10 NV Oct. 30, Nov. 27 NY Feb. 12 OK Nov. 27 PA Nov. 27 RI Aug. 10 SC May 11, Nov. 27 TN Apr. 10 TX Nov. 27, Dec. 24 UT Jul. 24 VA Nov. 27 VT Mar. 3, Aug. 17, Nov. 27 WA Nov. 27 WI Apr. 10 WV Feb. 12, Jun. 19, Dec. 27 NOTE: The following are Federal holidays for 2009. All state banking institutions will also be closed on these days. Jan. 1, Jan. 19, Jan. 20, Feb. 16, Apr. 16, May 25, Jul. 3, Sep. 7, Oct. 12, Nov. 11, Nov. 26, and Dec. 25. NOTE: The following states do not have a state banking holiday in 2009: AZ, DC, ID, MT, NM, OH, OR, SD, and WY. NOTE: If state code is 'MU', the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 2010. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing. State-Banking Holidays table for 2010. AK Mar. 29, Oct. 18 AL Feb. 16, Apr. 26, Jun. 7 AR Dec. 23 CA Feb. 12, Mar. 31, Apr. 2, Sep. 9 CO Aug. 2 CT Feb. 12, Apr. 2 DE Apr. 2, Nov. 26 FL Nov. 26 GA Apr. 26 HI Mar. 26, Apr. 2, Jun. 11, Aug. 20 IA Nov. 26 IL Feb. 12, Nov. 26 IN Feb. 12, Apr. 2 KS Nov. 26 KY Dec. 23 LA Feb. 16, Apr. 2 MA Apr. 19 MD Nov. 26 ME Apr. 19 MI Nov. 26 MN Nov. 26 MO Feb. 12, May 7 MS Apr. 26 NC Apr. 2, Nov. 26, Dec. 23 ND Apr. 2 NE Apr. 30, Nov. 26 NH Nov. 26 NJ Mar. 12, Apr. 2 NV Oct. 29, Nov. 26 NY Feb. 12 OK Nov. 26 PA Nov. 26 RI Aug. 9 SC May 10, Nov. 26 TN Apr. 2 TX Nov. 26, Dec. 23 UT Jul. 23 VA Nov. 26 VT Mar. 3, Aug. 16, Nov. 26 WA Feb. 12, Nov. 26 WI Apr. 2 WV Feb. 12, Jun. 21, NOV. 26 NOTE: The following are Federal holidays for 2010. All state banking institutions will also be closed on these days. Jan. 1, Jan. 18, Feb. 15, Apr. 16, May 31, Jul. 5, Sep. 6, Oct. 11, Nov. 11, Nov. 25, Dec. 24 and Dec. 31. NOTE: The following states do not have a state banking holiday in 2010: AZ, DC, ID, MT, NM, OH, OR, SD, and WY. NOTE: If state code is 'MU', the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists state-banking holidays for 2011. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing. State-Banking Holidays table for 2011. AK Mar. 28, Oct. 18 AL Feb. 15, Apr. 25, Jun. 6 AR Dec. 23 CA Feb. 11, Mar. 31, Apr. 22, Sep. 9 CO Aug. 1 CT Feb. 11, Apr. 22 DE Apr. 22, Nov. 25 FL Nov. 25 GA Apr. 25 HI Mar. 25, Apr. 22, Jun. 10, Aug. 19 IA Nov. 25 IL Feb. 11, Nov. 25 IN Feb. 11, Apr. 22 KS Nov. 25 KY Dec. 23 LA Feb. 15, Apr. 22 MA Apr. 25 MD Nov. 25 ME Apr. 25 MI Nov. 25 MN Nov. 25 MO Feb. 11, May 9 MS Apr. 25 NC Apr. 22, Nov. 25, Dec. 23 ND Apr. 22 NE Apr. 29, Nov. 25 NH Nov. 25 NJ Mar. 11, Apr. 22 NV Oct. 31, Nov. 25 NY Feb. 11, Nov. 8 OK Nov. 25 PA Nov. 25 RI Aug.1 SC May 10, Nov. 25 TN Apr. 22 TX Nov. 25, Dec. 23 UT Jul. 25 VA Nov. 25 VT Mar. 1, Aug. 16, Nov. 25 WA Feb. 11, Nov. 25 WI Apr. 22 WV Feb. 11, Jun. 20, NOV. 25 NOTE: The following are Federal holidays for 2011. All state banking institutions will also be closed on these days. Jan. 1, Jan. 17, Feb. 21, Apr. 15, May 30, Jul. 4, Sep. 5, Oct. 10, Nov. 11, Nov. 24, Dec. 24 and Dec. 26. NOTE: The following states do not have a state banking holiday in 2011: AZ, DC, ID, MT, NM, OH, OR, SD, and WY. NOTE: If state code is 'MU', the taxpayer is a multiple state depositor and no state-banking holidays are allowed in considering FTD penalty. The following table lists Federal holidays for 2012. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing. Federal holidays for 2012 Jan. 2, Jan. 16', Feb 20, April 16, May 28, July 4, Sept. 3, Oct. 8, Nov. 12, Nov 22 and Dec. 25, The following table lists Federal holidays for 2013. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing. Federal holidays for 2013 Jan. 1, Jan. 21, Feb 18, April 16, May 27, July 4, Sept. 2, Oct. 14, Nov. 11, Nov. 28, and Dec. 25 The following table lists Federal holidays for 2014. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing. Federal holidays for 2014 Jan. 1, Jan. 20, Feb 17, May 26, July 4, Sept. 2, Oct. 14, Nov. 11, Nov. 27, and Dec. 25 The following table lists Federal holidays for 2015. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing. Federal holidays for 2015 Jan. 1, Jan. 19, Feb 16, May 25, July 3, Sept. 2, Oct. 14, Nov. 11, Nov. 26, and Dec. 25 The following table lists Federal holidays for 2016. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing. Federal holidays for 2016 Jan. 1, Jan. 18, Feb 15, April 15, May 30, July 4, Sept. 5, Oct. 10, Nov. 11, Nov. 24, and Dec. 26 The following table lists Federal holidays for 2017. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing Federal holidays for 2017 Jan. 2, Jan. 16, Jan. 20, Feb 20, April 17, May 29, July 4, Sept. 4, Oct. 9, Nov. 10, Nov. 23, and Dec. 25 The following table lists Federal holidays for 2018. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing Federal holidays for 2018 Jan. 1, Jan. 15, Feb 19, April 16, May 28, July 4, Sept. 3, Oct. 8, Nov. 12, Nov. 22, and Dec. 25 The following table lists Federal holidays for 2019. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing Federal holidays for 2019 Jan. 1, Jan. 21, Feb 18, April 16, May 27, July 4, Sept. 2, Oct. 14, Nov. 11, Nov. 28, and Dec. 25 The following table lists Federal holidays for 2020. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing Federal holidays for 2020 Jan. 1, Jan. 20, Feb 17, April 16, May 25, July 3, Sept. 7, Oct. 12, Nov. 11, Nov. 26, and Dec. 25 The following table lists Federal holidays for 2021. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing Federal holidays for 2021 Jan. 1, Jan. 18, Feb 15, April 16, May 31, July 5, Sept. 6, Oct. 11, Nov. 11, Nov. 25, Dec. 24 and Dec. 31. The following table lists Federal holidays for 2022. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing Federal holidays for 2022 Jan. 17, Feb. 21, April 15, May 30, July 4, Sept. 5, Oct. 10, Nov. 11, Nov. 24, and Dec. 26 The following table lists Federal holidays for 2023. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing Federal holidays for 2023 Jan. 2, Jan. 16, Feb 20, April 17, May 29, July 4, Sept. 4, Oct. 09, Nov. 10, Nov. 23, Dec. 25., and June 19. The following table lists Federal holidays for 2024. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing Federal holidays for 2024 Jan. 1, Jan. 15, Feb 19, April 16, May 27, June 19, July 4, Sept. 2, Oct. 14, Nov. 11, Nov. 28, and Dec. 25. The following table lists Federal holidays for 2025. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing Federal holidays for 2025 Jan. 1, Jan. 20, Feb 17, April 16, May 26, June 19, July 4, Sept. 1, Oct. 13, Nov. 11, Nov. 27, and Dec. 25. The following table lists Federal holidays for 2026. These dates are used in computing Form 941, Form 943 , Form 945, and Form 944 penalty processing Federal holidays for 2026 Jan. 1, Jan. 19, Feb 16, April 16, May 25, June 19, July 3, Sept. 7, Oct. 12, Nov. 11, Nov. 26, and Dec. 25.
Terminal Response: Error Messages
2.3.28.8 (01-01-2006) Terminal Response: Error Messages An asterisk will appear after the invalid element(s) displaying generated error messages on line 13 beginning in position 1. The invalid element(s) can be corrected and re-entered.
General Error Messages:
2.3.28.8.1 (01-01-2009) General Error Messages: "INVALID DEFINER" The command code definer is not A, B, C, G, OR blank. "INVALID TIN" EIN other than numeric or incorrectly formatted. "INVALID MFT" MFT is not 01, 11 or 16, CT-1, 1042, 14. "INVALID TXPD" Tax period invalid or not greater than 198103. "ACCOUNT NOT ON FILE" TIN is not present on the TIF. "INVALID PERIOD LETTER" Period letter is blank, "Z" or not valid (A thru X) for an input period liability. "DUPLICATE PERIOD LETTER" Period letter is duplicated for two or more period amount fields. "TXMOD NOT PRESENT" Requested Tax Period is not available. "INVALID AMOUNT" The input liability is not formatted properly or contains an incorrect value. "UNABLE TO COMPUTE-AT LEAST ONE LIAB GREATER OR EQUAL 100,000" These liabilities are due in one banking day. The program will allow computation of 100,000 or larger liability amounts for tax periods 199303 and subsequent. "ERRONEOUS CREDIT AMT IN REQUESTED MODULE" A net period credit amount is greater than zero. This could occur if a module contains a credit reversal for a credit that did not post (and is not pending) or if a credit erroneously posted as a positive amount. "NO LIABILITY INPUT" both QTR-LIAB-AMT and PD-LIAB-AMT contain blanks or dollar signs. "BAD FORMAT CODE" The command code cannot build this output line because a bad format code has been passed from subroutine FTDTR. Please notify National Office programmer. "UNABLE TO COMPUTE-BASE PERIOD CODE NOT 1 THRU 4" For tax periods 199303 and subsequent on FORM 941, 943, 945, 944 and CT-1, the BASE-PERIOD-CD must be 1 thru 4 in order to compute FTD penalty. Operator has the option of changing this code for computation purposes thru FTDPNB screen. "UNABLE TO COMPUTE-DEFINER "C" VALID FOR 1993 TAX PERIODS ONLY" . Definer " C" is for the transitional rule of the four quarters of 1993. WARNING: FTD PENALTY IS BEING WAIVED DUE TO HURRICANE KATRINA - For Form 941, the FTD Penalty will be bypassed for the Hurricane Katrina designated disaster areas for tax periods 200509 through 200609. NON-DESIGNATED DEPOSIT, UNSATISFIED TAX LIABILITY REMAINING - PLEASE DESIGNATE - warning user to designate all non-designated deposits. WARNING: ENTITY EMPLOYMENT CODE "A" or" F" - bypass the FTD penalty calculation when an Employment Code "A" or "F" is present in the entity. *WARNING: TC 766 credit (line 66) exceeds the 12/31 tax liability (line 59). - warning user the TC 766 credit exceeds the 12/31 tax liability.
General Error Messages for FTDPNB Letter Screen:
2.3.28.8.2 (01-01-2007) General Error Messages for FTDPNB Letter Screen: "INVALID ENTRY, MUST BE (Y) OR (X) OR (_)" Input value is invalid. "IF COMPLETE BREAKDOWN NOT REQUESTED, SPECIFY AT LEAST ONE LIABILITY NUMBER" Required to enter a valid Liability Number since no complete breakdown indicator was entered. "PLEASE CORRECT INVALID PARAGRAPH CODE" Input is not a valid Paragraph Code. "DUPLICATE ENTRY NOT ALLOWED" A duplicate Liability Number and Paragraph Code specified. "PARA CODE ENTERED IS NOT A STAND ALONE-MUST HAVE A VALID LIAB NUMBER" Required to input a valid Liability Number for the Paragraph Code entered. "CONFLICT-STAND ALONE/LIABILITY NUMBER SPECIFY SAME BASE PARA CODE" Paragraph Code entered requires a valid Liability Number or Stand Alone but not both. "INVALID LIABILITY NUMBER-MUST BE NUMERIC AND VALID RANGE" Liability Number other than numeric or incorrectly formatted. "INVALID LIABILITY NUMBER FOR PARAGRAPH CODE ENTERED, IT MUST BE 00" Paragraph Code entered requires a Stand Alone Number (00). "PLEASE CORRECT INVALID LIABILITY NUMBER RANGE MUST BE 01 TO XX" Liability Number entered is out of range. "INQUIRY DATE MUST START TAX YEAR 1993 TO THE CURRENT DATE" Date entered must be greater than 1992. "COMPUTE TO DATE MUST BE EQUAL OR GREATER THAN RETURN DUE DATE" Date entered must be greater than RDD. "Your CP-568 letter request cannot be processed at this time. TIF data indicates that CAF/RAF data needs to be reviewed to determine if a duplicate copy needs to be generated and sent to a reporting agent. However, the necessary CAF/RAF data could not be located. Therefore, access to the letter request screen will be denied until the problem with this account has been resolved." CAF/RAF-ERROR-MESSAGE TAXPAYER DOES NOT HAVE ANY CAF/RAF-AUTHORITY-MOD-RECS NO MATCH ON TAXPAYER KEY
General Error Messages for FTDPNB Delete Screen:
2.3.28.8.3 (01-01-2007) General Error Messages for FTDPNB Delete Screen: "PLEASE CORRECT INVALID EIN" EIN other than numeric or incorrectly formatted. "INVALID ENTRY, MUST BE (X) OR (_) " Input value is invalid. "PLEASE CORRECT INVALID TAX PERIOD " Tax period invalid or not greater than 199212.
Terminal Valid Response
2.3.28.9 (01-01-2007) Terminal Valid Response If Command Code FTDPN with definer A is input correctly, the format for FTDPNB will be generated. Command Code FTDPN with W-IND = F (credit screen) is for FIFO computation for tax period greater than 200112. If there is mismatch between Master file and IDRS, then a warning message will be displayed: 'Enter "F" after "W-IND=" at CRDT SCR for FIFO '. Allow display of FIFO computation when there are more than one liability due date per week. That is allowing display of FIFO whenever two semiweekly liability due dates (Wednesday and Friday) occur in the same week at least once per quarter (MFT 01) or four times per year (MFT 11, 16, 09, 12, 14). A warning message will be displayed: "* Do not send FIFO computation unless it agrees with taxpayer's designation". For other conditions, if the FIFO computation is more than $250.00, the FIFO computation is blocked and a warning message will be displayed: *Warning: FIFO is not applicable. Enter "M" for Most Recent Computation*. If command Code FTDPN (no definer) is input correctly, FTDPNB will be displayed along with the period liability amounts from the posted return. It will also display the FTD penalty computation based on the liabilities on the posted return and its associated debits. If the Safe Haven Rule condition is encountered when processing a tax module, a warning message will be generated in inverse video at the bottom of the last FTDPN output screen for tax periods 199212 and earlier. This message will read: "WARNING: SAFE HAVENREVIEW MANUALLY" . The program, however, will still compute the FTD penalty.
Command Code FTDPN With Definer A Input
Exhibit 2.3.28-1 Command Code FTDPN With Definer A Input Input ScreenFTDPNA Note: Command Code FTDPN with "A" is valid for Form 941, Form 943 and Form 945, Form CT-1, Form 944, Form 1042 This is a screen shot of an input screen for FTDPN with Definer A. Please click here for the text description of the image. Record Element Description Elem Line Position Description Format 1 1 15 Command Code FTDPN 2 1 6 Command Code Definer A or C or blank 3 1 716 EIN nn-nnnnnnn 4 2 12 MFT 01 5 2 49 Tax Period yyyymm
Command Code FTDPN with Definer A Response
Exhibit 2.3.28-2 Command Code FTDPN with Definer A Response Response ScreenFTDPNA This is an example of a Response screen after an input of FTDPNA. Please click here for the text description of the image. Record Element Description Elem Line Position Description Format 6 2 139 Literal IF TOTAL LIABILITY FOR QUARTER IS TO BE 7 3 323 Literal AVERAGED, ENTER TOTAL 8 3 2537 Total Tax Liability z,zzz,zzz,zzz 9 4 134 Literal ELSE, ENTER PERIOD LETTERS AND AMTS: 10 714 10, 30, 50 Period Letter AX 11 714 1124 3144, 5164 Periodic Liability Amount zzz,zzz,zzz.99
Command Code FTDPN With Definer B Response
Exhibit 2.3.28-3 Command Code FTDPN With Definer B Response Response Screen This is an example of a Response screen for FTDPNB. Please click here for the text description of the image. Amount fields are depicted in the above screen graph and following element specifications with z's and 9's. This represents zero suppression of leading zeros. Line 24 will contain system paging information. See next page for second page of output screens for Form 941.
Command Code FTDPN With Definer B Valid Response (1)
Exhibit 2.3.28-4 Command Code FTDPN With Definer B Valid Response (1) Response Screen This is an example of the first Screen for FTPNB with a valid account. Please click here for the text description of the image. Line 24 will contain system paging information. See next page for third page of FTDPNB output screens for Form 941
Command Code FTDPN With Definer B Valid Response (2)
Exhibit 2.3.28-5 Command Code FTDPN With Definer B Valid Response (2) Response Screen This is an example of the second Response screen for FTDPNB. Please click here for the text description of the image. Record Element Description Elem Line Scr Position Description Format 1 1 13 16 Literal FTDPNB 2 1 13 4757 Edited TIN and File Source nn-nnnnnnn 3 1 13 6162 MFT nn 4 1 13 6469 TAX-PRD yyyymm 5 3 1 19 Literal TOTAL TAX 6 3 1 1582 TOT-TAX-LIABILITY zzz,zzz,zz9.99 7 3 1 3345 Literal TOTAL CREDITS 8 3 1 5063 FTD-TOT-CREDITS zzz,zzz,zz9.99 9 3 1 6773 Literal 3-DAY= 10 3 1 75 QTR-3-DAY-CD n 11 5 1 167 Literal See Note #1 12 6 1 167 literal See Note #2 13 815 1 10, 31, 52 PERIOD LETTER A through X 14 815 1 1225 RET-941-PERIODIC-LIAB-AMT or averaged amt zzz,zzz,zz9.99 15 18 1 1246 Literal TOTAL AMOUNT SUBJECT TO FTD PENALTY 20 3 1141 TOTAL AMOUNT SUBJECT TO PENALTY 16 18 1 5467 RET-941-AMT-SBJCT-TO-PNLTY zzz,zzz,zz9.99 20 3 5467 17 19 1 1224 Literal TOTAL PENALTY 21 3 1123 18 18 1 2731 RET-941-PEN-RATE (5%) or (10%) 20 3 2630 19 19 1 5467 RET-941-TOT-PEN zzz,zzz,zz9.99 21 3 5467 20 22 1 174 Literal See Note #3 21 2 2 2358 Literal EIGHTMONTHLY DEPOSITOR INFORMATION 22 4 2 515 Literal ACCUMULATED 2 3 23 4 2 1934 Literal APPLIED DEPOSITS 2 3 24 4 2 3949 Literal UNDEPOSITED 2 3 25 4 2 5467 Literal AMOUNT SUBJECT 2 3 26 5 2 416 Literal TAX LIABILITY 3 3 27 5 2 2132 Literal AND PAYMENTS 3 3 28 5 2 4246 Literal TAXES 3 3 29 5 2 5467 Literal TO FTD PENALTY 3 3 30 613 2 1 PERIOD-LETTER A through X 1522 2 411 3 31 613 2 316 FTD-ACCUM-LIAB-AMT zzz,zzz,zz9.99 1522 2 411 3 32 613 2 2033 FTD-ACCUM-CREDIT-AMT zzz,zzz,zz9.99 1522 2 411 3 33 613 2 3750 FTD-UNDEP-TAXES zzz,zzz,zz9.99 1522 2 411 3 34 613 2 5467 FTD-AMT-SUBJT-TO-PNLTY zzz,zzz,zz9.99 34 1522 2 34 411 3 35 13 3 2654 Literal MONTHLY DEPOSITOR INFORMATION 36 15 3 1424 Literal UNDEP TAXES 37 15 3 2842 Literal APPLIED CREDITS 38 15 3 4559 Literal AMT SUBT TO PEN 39 16 3 19 Literal 1ST MONTH 40 16 3 1522 1ST-MO-UNDEP-TAXES z,zz9.99 41 16 3 3138 1ST-MO-APPL-CRED z,zz9.99 42 16 3 4855 1ST-MO-SUBJ-TO-PEN z,zz9.99 43 17 3 19 Literal 2ND MONTH 44 17 3 1522 2ND-MO-UNDEP-TAXES z,zz9.99 45 17 3 3138 2ND-MO-APPL-CRED z,zz9.99 46 17 3 4855 2ND-MO-SUBJ-TO-PEN z,zz9.99 47 18 3 19 Literal 3RD MONTH 48 18 3 1522 3RD-MO-UNDEP-TAXES z,zz9.99 49 18 3 3138 3RD-MO-APPL-CRED z,zz9.99 50 18 3 4855 3RD-MO-SUBJ-TO-PEN z,zz9.99 NOTE #1: Use literal "THE FOLLOWING REFLECTS TAX LIABILITIES FOR THE QUARTER." NOTE #2: Use literal "AN AVERAGE IS REFLECTED IF NO PERIODIC LIABILITY AMOUNT WAS POSTED " ; NOTE #3: Use literal "SCREENS 2 & 3 REFLECT DEPOSITS/PAYMENTS AS APPLIED TO LIABILITIES WHEN DUE" NOTE #4: The letter "p" after the Applied Deposits and Payments field donates a pre-deposit (money which comes in before the end of the eight-monthly period and reduces the liability below the $3,000 threshold amount.
Command Code FTDPN With Definer A Response (Tax Periods 199303 and subsequent)
Exhibit 2.3.28-6 Command Code FTDPN With Definer A Response (Tax Periods 199303 and subsequent) Response Screen FTDPNA This is an example of a response screen for FTDPNA. Please click here for the text description of the image. Record Element Description Elem Line Position Description Format 1 1 15 Command Code FTDPN 2 1 6 Command Code Definer B 3 1 2536 Literal BASE-PRD-CD= 4 1 37 BASE PERIOD CODE n 5 1 4756 Edited TIN and File Source nn-nnnnnnn 6 1 6162 MFT nn 7 1 6469 TAX-PRD yyyymm 8 2 140 Literal See Note #1 9 3 528 Literal See Note #2 10 3 3042 Tax Liability z,zzz,zzz,zzz 11 3 4473 Literal See Note #3 12 4 1-12 Literal FIRST MONTH 13 4 1326 First month totall zzz,zzz,zz9.99 14 4 28-39 Literal SECOND MONTH 15 4 4154 Second month total zzz,zzz,zz9.99 16 4 56-66 Literal THIRD MONTH 17 4 6780 Third month total zzz,zzz,zz9.99 18 621 12, 1415, 2829, 4142, 5556, 6869 days of the month nn 19 621 312, 1625, 3039, 4352, 5766, 7079 Liability Amt. zzzzzz9.99** Note #1: Use literal "IF TOTAL LIABILITY FOR THE QUARTER IS TO" Note #2: Use literal "BE AVERAGED, ENTER TOTAL" Note #3: Use literal "ELSE, ENTER LIABILITIES BELOW" :
Command Code FTDPN With Definer Blank display response (Form 943 and Form 945 starting Tax Periods 199412 and subsequent.)
Exhibit 2.3.28-7 Command Code FTDPN With Definer Blank display response (Form 943 and Form 945 starting Tax Periods 199412 and subsequent.) Response Screen FTDPN with aBlank Definer. Response Screen FTDPN with a Blank Definer. Please click here for the text description of the image. Record Element Description Elem Line Position Description Format 1 1 15 Command Code FTDPN 2 1 6 Command Code definer B 3 1 1118 Literal See Note #1 4 1 2536 Literal BASE-PRD-CD= 5 1 37 BASE PERIOD CODE n 6 1 4756 Edited TIN and File Source nn-nnnnnnn 7 1 6162 MFT nn 8 1 6469 TAX-PRD yyyymm 9 2 140 Literal See Note #2 10 2 5163 TOTAL z,zzz,zzz,zzz 11 3 528 Literal See Note #3 12 3 3042 Total Tax Liability z,zzz,zzz,zzz 13 3 4473 Literal See Note #4 14 3 5163 Total-credit-used z,zzz,zzz,zzz 15 3 6878 Literal See Note #5 16 3 7980 State-cd nn 17 4 155 Literal See Note #6 18 5-21 1-5 Literal mmdd 21-24 41-44 19 521 6-18 Liability Amt. zzzzzzzz9.99** 26-38 46-58 20 5-16 62-63 literal 01-12 21 5-16 65-78 Monthly total z,zzz,zzz,9.99 20 22 153 Literal See Note #7 21 23 133 Literal See Note #8 22 23 3446 Amt-to-penalty z,zzz,zzz,zzz 23 23 4861 Literal See note #9 24 23 6274 Total-penalty z,zzz,zzz,zzz Note #1: Use literal "Match" or " Mismatch" Note #2: Use literal "IF TOTAL LIABILITY IS TO BE AVERAGED, ENTER TOTAL" Note #3: Use literal "TOTAL ROFT" Note #4: Use literal "TOTAL CREDIT USED" Note #5: Use literal "STATE CD =" Note #6: Use literal "TAX LIABILITIES ON THE POST RETURN OR OPERATOR INPUT: MONTHLY TOTALl" Note #7: Use literal "For a summary of the breakdown page(s), Enter _ (Y):" For Form 945: Use literal "R= Request Letter D=Delete Request, Enter _ (Y):(S=Summary Breakdown)" Note #8: Use literal "TOTAL AMT SUBJECT TO FTD PENALTY " Note #9: Use literal "TOTAL PENALTY" ** due to spacing limitations, commas are not required in order to compute million dollar liability accounts.
Command Code FTDPN4-tier FTD penalty output screens
Exhibit 2.3.28-8 Command Code FTDPN4-tier FTD penalty output screens Command Code FTDPNOutput Explanation Display for Form 941 (for tax periods 199106 and later). The screen on this page is for tax periods 199106 thru 199212. The screen on the next page is for tax periods 199303 and subsequent. The middle screens and the totals screen described on the following pages will stay the same for both. Response Screen Response screen for FTDPNB. Please click here for the text description of the image. Amount fields are depicted in the above screen graph and following element specifications with z's and 9's. This represents zero suppression of leading zeros. Line 24 will contain system paging information. THE FIELDS MARKED WITH A + WILL NOT BE DISPLAYED ON CC FTDPN Exhibit 2.3.28-10. for computation screens and record layouts for Form 941 penalty computation for tax periods 199303 and subsequent
Command Code FTDPN Output Explanation Display (Form 941, Form 943 and Form 945 for Tax Period 199303 and subsequent)
Exhibit 2.3.28-9 Command Code FTDPN Output Explanation Display (Form 941, Form 943 and Form 945 for Tax Period 199303 and subsequent) Response Screen This is an example of FTDPN output explanation display. Please click here for the text description of the image. Amount fields are depicted in the above screen graph and following element specifications with z's and 9's. This represents zero suppression of leading zeros. THE FIELDS MARKED WITH A+ WILL NOT BE DISPLAYED ON CC FTDPN See next pages for computation output screens for Form 941 (tax periods 199106 and subsequent). Due to space limitations, the user does not have to use commas to compute million dollar liabilities. Record Element Description Elem Line Scr Position Description Format 1 1 1+ 16 Literal FTDPNB 2* 1 1+ 2536 Literal BASE PRD CD= 3* 1 1+ 37 BASE-PRD-CD n 4 1 1+ 4756 Edited TIN and File Source enn-nnnnnnn 5 1 1+ 6162 MFT nn 6 1 1+ 6469 TAX-PRD yyyymm 7 1 1+ 7379 SCREEN-JULIAN-DT yyyyddd 8 3 2+ 19 Literal TOTAL-TAX 9 3 2+ 1528 TOTAL-TAX zzz,zzz,zz9.99 10 3 2+ 3349 Literal TOTAL CREDIT USED 11 3 2+ 5063 TOTAL-CREDIT zzz,zzz,zz9.99 12 3 2 6977 Literal STATE-CD 13 3 2 7879 STATE CODE nn 14 4 2 155 Literal See Note #1 15 5 2 111 Literal FIRST MONT 16 5 2 13-26 First month amout zzz,zzz,zz9.99 17 5 2 2839 Literal SECOND MONTH 18 5 2 41-54 Second month amout zzz,zzz,zz9.99 19 5 2 5666 Literal THIRD MONTH 20 5 2 67-80 Third month amout zzz,zzz,zz9.99 21 620 2 12, Day of Month nn 1415, 2829, 4142, 5556, 6869 22 620 2 312, Liability Amt zzz,zz9.99 1625, 3039, 4352, 5766, 7079 23 21 2 1415, Day of Month nn 4142 6869 24 21 2 1625, Liability Amt zzz,zz9.99 4352, 7079 25 22 2 147 Literal R=REQUEST LETTER,D=DELETE REQUEST, ENTER ==> 26 22 2 48 FTD-LETTER-IND r or d 27 23 2 132 Literal TOTAL AMT SUBJECT TO FTD PENALTY 28 23 2 3447 TOTAL FTD PENALTY zzz,zzz,zz9.99 29 23 2 5062 Literal TOTAL PENALTY 30 23 2 6477 TOTAL-PENALTY zzz,zzz,zz9.99 NOTE: Use Literal "TAX LIABILITIES ON THE POSTED RETURN OPERATOR INPUT: " .
Command Code FTDPN Output Explanation Display (Form 941 for Tax Period 199303 and subsequent. This screen(s) displays the credits.)
Exhibit 2.3.28-10 Command Code FTDPN Output Explanation Display (Form 941 for Tax Period 199303 and subsequent. This screen(s) displays the credits.) Response Screen This is an example of a FTDPN output explanation display. Please click here for the text description of the image. Record Element Description Elem Line Scr Position Description Format 1 1 1+ 17 Literal FTDCOMP or FTDPNB 2* 1 1+ 2536 Literal BASE-PRD-CD= 3* 1 1+ 37 BASE-PRD-CD n 4 1 1+ 4756 Edited TIN and File Source nn-nnnnnnn 5 1 1+ 6162 MFT nn 6 1 1+ 6469 TAX-PRD yyyymm 1 1+ 70 ENROLLED-IND (temp) See Note #4 7 1 1+ 7379 SCREEN-JULIAN-DT yyyyddd 8 2 1+ 159 Literal See Note #2 9 2 1+ 6166 Literal W-IND= 10 2 1+ 67 FTD-waiver-ind n value 'Y' or 'N' 11 2 1+ 6972 EFTPS-ELEC-DPST-IND yyyy 12 2 7379 Literal =EFT-YR 13 3 2+ 135 Literal See Note #1 14 3 2+ 3851 CREDITS-TOTAL zzzzzzzzzz9.99 15 3 2+ 6977 Literal STATE-CD= 16 3 2+ 7879 STATE-CD nn 17 4 2+ 167 Literal See Note #5 18 4 2+ 7077 Literal 15%-IND= 19 4 2+ 78 15-PCT-IND N value 'Y' or 'N' 20 5 2+ 124 Literal See note #3 21 5 2+ 2953 Literal See Note #3 22 5 2+ 5780 Literal See Note #3 23 622 2+ 14 Transaction nnne (See Amendment #1) 2830 Or L## (see note #5, #6) 5557 24 522 2+ 512 Trans-Date mmddyyyy 3239 5966 25 522 2+ 1426 Trans-Amount $$$$$$$$$$$$$$ 4153 6880 NOTE #1Use literal "TOTAL AMOUNT OF CREDIT TRANSACTIONS" . NOTE #2Use literal "CREDIT TRANSACTIONS ON THE POSTED RETURN OR OPERATOR INPUT:" . NOTE #3Use literal "TC/E DATE TRANS-AMOUNT" . NOTE #4Use literal "E" Only present for purposes of the EFTPS Penalty Waiver starting Tax Year 1997 (refer to Amendment #3). A display of this literal "E" on this position signify that the Taxpayer is considered ENROLLED for purposes of the EFTPS waiver. NOTE #5Use literal "To Designate, Enter L##" (L=Indicator ##=Incurred Liability Number) NOTE #6To designate a particular TC650, user can now input "L##" by overlaying the existing 650. The "L" indicates that the credit (650) is being designated to a certain Incurred Liability Number (##) skipping the FIFO method. *NOTE: Only present for tax periods greater than 199212 (all screens).
Command Code FTDPN Output Explanation Display (Form 943 and Form 945 for Tax Period 199412 and subsequent. This screen(s) displays the credits.)
Exhibit 2.3.28-11 Command Code FTDPN Output Explanation Display (Form 943 and Form 945 for Tax Period 199412 and subsequent. This screen(s) displays the credits.) Response Screen This is an example of an output explanation display for forms 943 and 945. Please click here for the text description of the image. Record Element Description Elem Line Scr Position Description Format 1 1 1+ 17 Literal FTDCOMP or FTDPNB 2* 1 1+ 2536 Literal BASE-PRD-CD= 3* 1 1+ 37 BASE-PRD-CD n 4 1 1+ 4756 Edited TIN and File Source nn-nnnnnnn 5 1 1+ 6162 MFT nn 6 1 1+ 6469 TAX-PRD yyyymm 1 1+ 70 ENROLLED-IND (temp) See Note #4 7 1 1+ 7379 SCREEN-JULIAN-DT yyyyddd 8 2 2+ 61 Literal W-IND= 9 2 2+ 67 FTD-waiver-ind n value 'Y' or 'N' 10 2 1+ 6972 EFTPS-ELEC-DPST-IND yyyy 11 2 7379 Literal =EFT-YR 12 3 2+ 135 Literal See Note #1 13 3 2+ 5363 Literal 15%-IND= 14 3 2+ 64 15-PCT-IND n 'Y' or 'N' 15 3 2+ 3851 CREDITS-TOTAL Zzzzzzzzzz9.99 16 3 2+ 6977 Literal STATE-CD= 17 3 2+ 7879 STATE-CD nn 18 4 2+ 124 Literal See Note #3 19 4 2+ 2953 Literal See note #3 20 4 2+ 5780 Literal See Note #3 21 521 2+ 14 Transaction nnne (See Amendment #1) 2830 Or L## (see note #2, #5) 5557 22 522 2+ 512 Trans-Date Mmddyyyy 3239 5966 23 522 2+ 1426 Trans-Amount $$$$$$$$$$$$$$ 4153 6880 24 23 2+ 170 Literal See Note #2 NOTE #1Use literal "TOTAL AMOUNT OF CREDIT TRANSACTIONS" . NOTE#2Use Literal To Designate, Enter L## (L=Indicator ##=Incurred Liability Number) If the liability numbers excess 100, do not enter L, enter 100, 101, etc. NOTE #3Use literal "TC/E DATE TRANS-AMOUNT" . NOTE #4Use literal "E" Only present for purposes of the EFTPS Penalty Waiver starting Tax Year 1997 (refer to Amendment #3). A display of this literal "E" on this position signify that the Taxpayer is considered ENROLLED for purposes of the EFTPS waiver. NOTE#6To designate a particular TC650, user can now input "L##" by overlaying the existing 650. The "L" indicates that the credit (650) is being designated to a certain Incurred Liability Number (##) skipping the FIFO method. *NOTE: Only present for tax periods greater than 199412 (all screens).
Command Code FTDPNOutput Explanation Display (Form 941, Form 943 and Form 945 for Tax Period 199303 and subsequent. This screen(s) displays the credits)
Exhibit 2.3.28-12 Command Code FTDPNOutput Explanation Display (Form 941, Form 943 and Form 945 for Tax Period 199303 and subsequent. This screen(s) displays the credits) FTD Penalty Amendments, per RIS TPS50038: Amendment #1. *NOTE: Starting Tax Year 199712, for Form 941, Form 943, and Form 945, CC FTDPNB Credit Screen will be displaying a new Electronic Deposit Year indicator in the second Iine starting at position 69 to 72 (YYYY). This applies to mandated Taxpayers required to deposit using the Electronic Federal Tax Payment System (EFTPS) or those Taxpayers mandated in 1995 and 1996 thru TAXLINK System. In addition, the literal "TC" on the fifth line had been changed to "TC/E" , where "E" signifies EFTPS or TAXLINK deposit. All credit transactions (NNN) that carries the Electronic Payment Indicator (EFTPS-ELEC-DPST-IND) or TAXLINK File Location Code (FLC) will be displayed on the Credit Screen with this new format " NNNE" , ex., 650E. Regular coupon deposits or Non-EFTPS deposits, if MANDATED account; will be displayed on the Credit Screen as " NNN" , space after the "NNN" means a coupon or NON-EFTPS deposit. Command Code FTDPN can now accept EFTPS or TAXLINK Credit Transaction on the FTDPNB CREDIT screen by inputting this new format "NNNE " , such as TRANS-CODE (650E/670E). This transaction will be considered an Electronic deposit when CC FTDPN re-computes the FTD penalty. *NOTE: The Indicator Year will indicate the tax year a Taxpayer is mandated to start using the EFTPS. Once a Taxpayer is mandated to deposit thru EFTPS, CC FTDPN will start monitoring the presence of the Electronic Payment Indicator on every deposit (TC's) when determining whether the EFTPS avoidance penalty applies. This new indicator (EFTPS-ELEC-DPST-IND) will be part of the posted (TIF62) and pending (TIF63) records using these format codes 01, 11, 13 and 47. Amendment #2. *NOTE: Starting Tax Year 1997, all EFTPS Payment Transactions (TC 610/640/660/670) that carry an Electronic Payment Indicator (EFTPS-ELEC-DPST-IND) will be treated as a good FTD credit (TC 650) not subject to a 10% payment avoidance penalty. Amendment #3. *NOTE: For FTD deposits made on MFT 01/11/16 tax modules with 199612/199703/199706/199709/199712 tax periods, the following penalty-waiver rules apply for FTD deposits dated between January 1 to September 30, 1997. For purposes of this penalty waiver, CC FTDPN will now recognized Financial Agent (FA) Enrollment Code and Mandated Tax Year as two types of indicators as a part of the criteria for allowing the EFTPS waiver. CC FTDPN will now display a literal "E" in position 68 in the first line of the FTDPNB CREDIT SCREEN, if a Taxpayer is considered as ENROLLED or the Financial Agent (FA) Code is set by the Banks. EFTPS Avoidance Penalty Criteria: 1. For FTD deposits dated between Jan. 01, to December 31, 1997 (inclusive): * FTD, EFT Avoidance Penalty will NOT be assessed on taxpayers who were mandated to start depositing Electronically in Jan. 1997. This penalty will still be applied to 1995/1996 EFT-Mandated Taxpayers. Late Deposit Penalty Criteria: 1. For FTD Deposits dated between Jan. 1, to Sept. 30, 1997 (inclusive): * FTD Late Penalty will NOT be assessed on any Taxpayer who deposits Electronically. * FTD Late Penalty will NOT be assessed on any Taxpayer who has deposited by regular coupon if his FA indicator is set (i.e., he has ENROLLED EFTPS or Electronic Payment Indicator = 1 on the TC650). Amendment #4. Extends the EFTPS Avoidance Penalty Criteria of Amendment #3. EFTPS Avoidance Penalty Criteria: 1. For FTD deposits dated between July 01, 1997 to December 31, 1997: * Penalty will NOT be assessed on taxpayers who were mandated to start depositing Electronically in Jan. 1997. This penalty will still be applied to 1995/1996 EFF-Mandated Taxpayers. Amendment #5. Extends the EFTPS Avoidance Penalty Criteria of Amendment 4 and Late Deposit Penalty Criteria of Amendment #3. EFTPS Avoidance Penalty Criteria: 1. For FTD deposits dated from December 31, 1997 to June 30, 1998: * Penalty will NOT be assessed on taxpayers who were mandated to start depositing Electronically in Jan. 1997 and 1998. This penalty will still be applied to 1995/1996 EFT-Mandated Taxpayers. Late Deposit Penalty Criteria: 1. For FTD Deposits dated from Oct. 1, 1997 to December 30, 1997 (inclusive): * FTD Late Penalty will NOT be assessed on 1997 Mandated Taxpayers enrolled in or volunteering to use EFTPS. * FTD Late Penalty will NOT be assessed on any Taxpayer who has deposited by regular coupon if his FA indicator is set (ie, he has ENROLLED EFTPS or Electronic Payment Indicator = 1 on the TC650).
Command Code FTDPNfor 4 tier FTD penalty output screens
Exhibit 2.3.28-13 Command Code FTDPNfor 4 tier FTD penalty output screens Response Screen Command Code FTDPN Output Explanation Breakdown page for Form 941, Form 943, Form 945, Form CT-1, Form 1042, and Form 944 This is an example of the FTDPN output explanation breakdown for forms 941, 943, 945, CT-1, 1042 and 944. Please click here for the text description of the image. The screen layouts for the liability breakdown portion of CC FTDPN may vary from one account to another and from one module to another. The line numbers of the literal explanations are contingent upon the type of activity which has taken place on the account/module being reviewed. This is an example of the Liability screen breakdown portion of the CC FTDPN. Please click here for the text description of the image. The screen layouts for the liability breakdown portion of CC FTDPN may vary from one account to another and from one module to another. The line numbers of the literal explanations are contingent upon the type of activity which has taken place on the account/module being reviewed. This is an example of the breakdown screen portion of the CC FTDPN. Please click here for the text description of the image. Response Screen Response Screen Please click here for the text description of the image. Record Element Description Elem Line Scr Position Description Format 1 1 15+ 17 Literal FTDCOMP or FTDPNB 2 1 15+ 1118 MF-MATCH-LITERAL "MATCH" or "MISMATCH" 3 1 1 2536 Literal* 3-DAY-IND= 4 1 1 37 QTR-3-DAY-CD n 5 1 15 2536 Literal** BASE-PRD-CD= 6 1 1 37 BASE-PRD-CD n 7 1 15 4756 Edited TIN and File Source nn-nnnnnnn 8 1 15 6162 MFT nn 9 1 15 6469 TAX-PRD yyyymm 10 1 15+ 7379 SCREEN-JULIAN-DT yyyyddd *NOTE: Only present for tax periods less than 199303 (all screens). **NOTE: Only present for tax periods greater than 199212 (all screens). 11 3 1 19 Literal TOTAL TAX 12 3 1 1528 TOT-TAX-LIABILITY zzz,zzz,zz9.99 13 3 1 3345 Literal TOTAL CREDITS 14 3 1 5063 FTD-TOT-CREDITS zzz,zzz,zz9.99 15 5 1 167 Literal See Note #1 16 6 1 167 Literal See Note #2 17 714 1 10, 31, 52 PERIOD-LEDTTER A through X 18 714 1 1225, 3346, 5467 RET-941-PERIODIC-LIAB-AMT or averaged amt zzz,zzz,zz9.99 19 18 1 1246 Literal TOTAL AMOUNT SUBJECT TO FTD PENALTY 20 18 1 5063 RET-941-AMT-SBJCT-TO-PNLTY z,zz9.99 21 19 1 1224 1ST-MO-SUBJ-TO-PEN TOTAL PENALTY 22 19 1 5063 Literal zzz,zzz,zz9.99 23 3 1 6771 RET-941-TOT-PEN "TRANS " 24 3 1 7578 Literal "EXPL" 25 4 1 6770 Literal "DATE" 26 4 1 7578 Literal "CODE" NOTE #1:For CC FTDPN use literal "THE FOLLOWING REFLECTS TAX LIABILITIES FOR THE QUARTER." For CC PIFTD use literal "THE FOLLOWING REFLECTS TAX LIABILITIES ON THE POSED RETURN RECORD" NOTE #2:Use literal "AN AVERAGE IS REFLECTED IF NO PERIODIC LIABILITY AMOUNT WAS POSTED." NOTE #3:Use literal "SCREENS 2&3 REFLECT DEPOSITS/PAYMENTS AS APPLIED TO LIABILITIES WHEN DUE" NOTE #4:The screen page I stands for intermediate page. Page 1 is a fixed screen. Pages 2-nnn (intermediate) will depend on the number of credits and liabilities which are present. For purposes of showing a sample of each type of line which could be present pages 24 are intermediate. The lines shown depend on the type of credits present on the module, their transaction dates and the due dates of the liabilities. Page 5 represents the final page. This page is also a fixed screen. +NOTE:Only present CC PIFTD. CC FTDPN will read FTDPNBno MATCH or MISMATCH literal since CC FTDPN does not compare its results against the Master File penalty computation. Elem Line Scr Position Description Format 27 5 I 16 PERIOS-LETTER "PERIOD" 28 5 I 8 Literal n(value A) 29 5 I 1020 Literal "ENDING DATE" 30 5 I 2635 PERIOD-ENDING-DT mm/dd/yyyy 31 6 I 428 Literal "ACCUMULATED TAX LIABILITY" 32 6 I 5162 ACCUM-TAX-LIAB Z,ZZZ,ZZ9.99 33 7 I 620 Literal APPLIED DEPOSIT" 34 7 I 3445 APPLIED-DEPOSIT-AMT Z,ZZZ,ZZ9.99 35 7 I 59-73 DEPOSIT-TRANS-DT-PAYMENT-NO mm/dd/yyyy (NN) (See note #1) 36 8 I 620 Literal "APPLIED PAYMEN" 37 8 I 3445 APPLIED-PAYMT-AMT Z,ZZZ,ZZ9.99 38 8 I 59-73 PYMT-TRANS-DT-PAYMENT-NO mm/dd/yyyy (NN) (See note #1) 39 9 I 417 Literal "TOTAL DEPOSITS" 40 9 I 5162 TOT-DEPOSIT-AMT Z,ZZZ,ZZ9.99 41 10 I 417 Literal "TOTAL PAYMENTS" 42 10 I 1931 Literal "(10% PENALTY) " 43 10 I 5162 TOT-PAYMENTS-AMT Z,ZZZ,ZZ9.99 44 10 I 7677 EXPL-CODE nn 45 11 I 420 Literal "UNDEPOSITED TAXES" 46 11 I 5162 AMT-UNDEPOSITED-TXS Z,ZZZ,ZZ9.99 47 12 I 432 Literal "AMOUNT SUBJECT TO FTD PENALTY" 48 12 I 5162 AMT-SJBCT-TO-FTD-PEN Z,ZZZ,ZZ9.99 49 14 I 430 Literal "CURRENT UNDEPOSITED BALANCE" 50 14 I 5162 CUR-UNDEPOSITED-BAL Z,ZZZ,ZZ9.99 51 15 I 632 Literal "APPLIED DPST (EXCESS CREDIT)" 52 15 I 3445 APPLIED-EXCESS-DPST Z,ZZZ,ZZ9.99 53 16 I 632 Literal "APPLIED PYMT (EXCESS CREDIT)" 54 16 I 3445 APPLIED-EXCESS-PYMT Z,ZZZ,ZZ9.99 55 19 I 433 Literal "AMT SUBJECT TO NN% FTD PENALTY" 56 19 I 5162 AMT-SBJCT-TO-nn-PCT-FTD-PNLTY Z,ZZZ,ZZ9.99 57 20 I 426 Literal "REMAINING TAX LIABILITY" 58 20 I 5162 REMAINING-TAX-LIAB, BAL Z,ZZZ,ZZ9.99 **Optional FieldThis will only appear if an explanation is required for deposits or payments. Note #1: NN -Split Payments number in sequential order 59 6 I 424 Literal "SAFE HAVEN AMOUNT DUE" 60 6 I 5162 SAFE-HAVEN-AMT Z,ZZZ,ZZ9.99 61 13 I 120 Literal "FIRST MONTH DUE DATE" 62 13 I 2635 1ST-MONTH-DUE-DT mm/dd/yyyy 63 14 I 421 Literal "MONTHLY AMOUNT DUE" 64 14 I 5162 MONTHLY-AMT-DUE Z,ZZZ,ZZ9.99 65 5 I 123 Literal "END OF QUARTER DUE DATE" 66 5 I 2635 END-OF-QTR-DUE-DT mm-dd-yyyy 67 14 I 621 Literal "15% PENALTY DATE" 68 14 I 6572 15-PCT-PEN-DT mm/dd/yyyy 69 18 I 433 Literal "AMT SUBJECT TO 15% FTD PENALTY" 70 18 I 5365 AMT-SUB-15-PCT-PNLTY z,zzz,zz9.99 71 19 I 426 Literal "NEW UNDEPOSITED BALANCE" 72 19 I 5162 RUNNING-UNDEPOSITED-BAL Z,ZZZ,ZZ9.99 73 13 I 431 Literal "TAX LIABILITY INCURRED DATE" 74 13 I 3544 TAX-LIAB-DATE mm/dd/yyyy 75 3 5 1733 Literal "TOTAL AMT SUBJECT" 76 3 5 4046 Literal "PENALTY " 77 3 5 5365 Literal "TOTAL PENALTY" 78 4 5 1831 Literal "TO FTD PENALTY" 79 4 5 4144 Literal "RATE" 80 4 5 5661 Literal "AMOUNT " 81 5 5 1930 TOT-AMT-SBJCT-2PCT-FTD-PNLTY Z,ZZZ,ZZ9.99 82 5 5 4243 Literal "2%" 83 5 5 5364 TOT-2PCT-FTD-PNLTY-AMT Z,ZZZ,ZZ9.99 84 6 5 1930 TOT-AMT-SBJCT-5PCT-FTD-PNLTY Z,ZZZ,ZZ9.99 85 6 5 4243 Literal "5%" 86 6 5 5364 TOT-5PCT-FTD-PNLTY-AMT Z,ZZZ,ZZ9.99 87 7 5 1930 TOT-AMT-SBJCT-10PCT-FTD-PNLTY Z,ZZZ,ZZ9.99 88 7 5 4143 Literal "10%" 89 7 5 5364 TOT-10PCT-FTD-PNLTY-AMT Z,ZZZ,ZZ9.99 90 8 5 1930 TOT-AMT-SBJCT-15PCT-FTD-PNLTY Z,ZZZ,ZZ9.99 91 8 5 4143 Literal "15%" 92 8 5 5364 TOT-15PCT-FTD-PNLTY-AMT Z,ZZZ,ZZ9.99 93 10 5 2043 Literal "TOTAL FTD PENALTY AMOUNT" 94 10 5 5364 TOT-FTD-PNLTY-AMT Z,ZZZ,ZZ9.99 95 12 5 2043 Literal "NET MASTER FILE PENALTY AMOUNT" 96 12 5 5364 NET-MF-PNLTY-AMT z,zzz,zz9.99
Command Code FTDPN Application Indicators
Exhibit 2.3.28-14 Command Code FTDPN Application Indicators The following are the values and meanings for the Explanation Code(s) displayed on the screen: (Only for tax periods 199106 and later) EXPL CODE TEXT 01 The undeposited taxes are less than or equal to 5% of the tax liability for this eighth-monthly period. The remaining undeposited taxes are due with the first deposit required after the 15th of the following month. 02 The undeposited taxes are less than or equal to 5% of the tax liability for this eighth-monthly period. The remaining undeposited taxes are due at the end of the following month. 03 Your payment is penalized 10% because you did not deposit your money with an authorized financial institution or a Federal Reserve Bank or branch that serves your area. 04 The applied credit was timely and not penalized. 05 The undeposited taxes are less than or equal to 2% of the tax liability or $100.00 of the tax liability, whichever is greater. The remaining undeposited taxes are due the first Wednesday or Friday on or after the 15th of the following month. 06 The undeposited taxes are less than or equal to 2% of the tax liability or $100.00 of the tax liability, whichever is greater. The remaining undeposited taxes are due at RDD. 07 This SHORT-FALL amount is carried forward and due with the return. 08 This SHORT-FALL amount is carried forward and due on the first Wednesday or Friday on or after the 15th of the following month. 09 This due date was determined from using a STATE or FEDERAL holiday in the computation 10 Your Deposit or Credit was penalized 10% because you did not deposit your money thru ELECTRONIC FUNDS TRANSFER (EFT). 11 Your Credit was posted as a Payment Transaction (TC 610/640/660/670) and was deposited using the Electronic Federal Tax Payment System (EFTPS). The transaction carries an Electronic Payment Indicator (EFTPS-ELEC-DPST-IND) and this will be treated as a good FTD deposit, not subject to 10% payment avoidance penalty. (Per, RIS50038: Amendment #2) 12 Your late Deposit or Credit was dated between Jan. 01 to Sept. 30 1997 and was made Electronically. This FTD Deposit will not be assessed for late FTD penalty. (Per. RIS50038: Amendment #3) 13 Your late coupon deposit was dated between Jan. 1 to Sept 30 1997 and will not be assessed for late FTD penalty because we considered you as an ENROLLED EFTPS (Financial Agent is set) or one of your deposits was made Electronically (Electronic Payment Indicator = 1 on the TC650). (Amendment #3) 14 The Net Return Liability (Lesser of Total Tax Settlement of Tax Per Taxpayer) is $2500 or less you are computing. Due to this, your deposit or credit can also be made as a check (to the IRS) for the full amount with your return without incurring FTD (Failure to Deposit) penalty. Starting Tax Periods 200103 and subsequent for Form 941/Form 943/Form 945 the "DeMinimus Rule " of $1000 or less was changed to $2500 or less. Command Codes PIFTD and FTDPN will now display Explanation Code 14 for information purposes only. This will inform users that their computation falls under the " DeMinimus Rule" . Per RIS# EXM-00049 15 The new Intended Payment Data (IPD) information found in the credit (TC650/660) was used in computing the FTD late deposit penalty. Starting ONLY in Tax Period 200003 and subsequent, Command Codes FTDPN and PIFTD) will be recognizing the presence of the Intended Payment Data (IPD) field in determining FTD late deposit penalty. PIFTD will use this date information for computing or recomputing the penalty. This new IPD date field will be found on TIF62 and TIF63, using format codes 11, 13 and 43. Per. ETA90036. 16 The credit or TC650 used to satisfy the Liability Amount was a designated credit input by the user in the FTDPNB credit screen. 17 Denotes that the presence of TC971 AC260 on the TAX MODULE and any FTD, penalties incurred, whether late FTD penalties (TC650) or Avoidance penalties (TC610, TC670) will be given Y2K FTD penalty relief, per RIS EXM00010A. This RIS provides Taxpayers who called and reported Y2K problem penalty relief. Only those taxpayers who have FTD penalties (late penalty and/or avoidance penalty) will be given penalty relief. 18 Denotes That changing liability payment schedule (Monthly to Semi-Weekly, Semi-weekly to Daily, Monthly to Monthly/Daily/Semi-weekly and vice Versa) will be given FTD penalty relief whether Late FTD penalties (TC650) or Avoidance penalties(TC610, TC670). Per RIS #EXM-00051 19 FTD penalty relief for Disaster. For any FTD deposit that is due within the disaster window, then extend the liability due date of that deposit to either 15 calendar days for the original due date of to Disaster Due Date - whichever date is earlier. If this new liability due date falls on a Fed/State holiday, then make the liability due date the next business day. 20 Indicates that the payment is a non-EFTPS credit transfer payment and the 10% avoidance penalty was not imposed. Note:Payment was moved in from another module. FTDPN cannot determine if the payment was an EFTPS payment. Verify whether or not the TP is liable for the 10% failure to use the EFTPS system penalty. When transferring a non-EFTPS payment into a required TP account, masterfile will NOT assess the avoidance penalty. A manual TC 180 will need to be assessed at the time of the credit transfer, or masterfile will waive the avoidance penalty. 21 For form 944, if the total liability for the quarter is less than $2,500, then sum the quarterly liability amount. Per EXM60048a00 22 Start from 201003, the new Safe Harbor rule for MFT 01 will be applied if: 1. Current-posting form 941's Total settlement is equal to or larger than $2,500 2. No next-day deposit obligation: and 3. Prior-Quarter-Indicator = 1 (amount in the immediately-prior quarter Form 941 is less than $2,500, or there is no return posted in the immediately prior quarter) Per Ris EXM090644 23 Avoidance penalty was waived for TC 670 payments between 1/1/2011 and 2-18-2011 posting for tax periods ending 201012 thru tax periods ending 201112 and there is no EFT-YR present. 24 Deposit due date was extended 3 additional business days from the normal deposit due date when there is no EFT-YR present and the normal deposit due date is dated between Jan thru May of 2011.
Command Code FTDPN Output Explanation Display (Form 941 and Form 945 for tax period 199303 and subsequent)
Exhibit 2.3.28-15 Command Code FTDPN Output Explanation Display (Form 941 and Form 945 for tax period 199303 and subsequent) Response Screen This is an example FTDPN output explanation display for Form 941 and 945 for tax period 199303 and subsequent. Please click here for the text description of the image. Record Element Description Elem Line Scr Position Description Format 1 1 6 15 Command Code FTDPN 2 1 6 6 Command Code Definer B 3 1 6 2536 Literal "BASE-PRD-CD=" 4 1 6 37 BASE-PRD-CD n 5 1 6 4756 Edited TIN and File Source nn-nnnnnnn 6 1 6 6162 MFT nn 7 1 6 6469 TAX-PRD yyyymm 8 1 6 7174 Literal "STA=" 9 2 6 7576 STATE-CODE(Deposit Made) XX 10 2 6 527 Literal "ENTER COMPUTE TO DATE [" 11 2 6 2835 NOT-COMPUTE-TO-DT MMDDYYYY 12 2 6 3471 Literal "]. (DEFAULT: DATE OF LETTER + 21 DAYS)" 13 3 6 133 Literal "TO REQUEST AN FTD LETTER, ENTER [," 14 3 6 3441 INQUIRY-DT mmddyyyy 15 3 6 4076 Literal "] FOR THE INQUIRY DATE. TO EXPLAIN A" 16 4 6 176 Literal "PENALTY ON A SPECIFIC LIABILITY, ENTER THE LIABILITY NUMBER(S) AND PARAGRAPH" 17 5 6 175 Literal "CODE(S). IF A COMPLET COMPUTATIONAL BREAKDOWN OF ALL LIABILITIES IS TO BE" 18 6 6 142 Literal "PRINTED AT THE END OF THIS LETTER, ENTER" 19 6 6 43 BREAKDOWN-IND y OR x 20 6 6 4463 Literal "(Y), OR (X) TO EXIT." 21 817 6 1012, 2729, 4547, 6365, Liability Breakdown number "1." Through "40." 22 817 6 1415, 3132, 4950, 6768 LIABILITY-NUM nn 23 817 6 13, 33, Literal "__" 51, 69 24 817 6 1719, FTD-EXPLANATION-CD nnn 3437 5254 7072 25 19 6 173 Literal "Note: NNTwo digit liability number displayed on the breakdown screen" 26 20 6 852 Literal "NNNThree digit paragraph explanation code." 27 22 6 176 Literal "To generate Letter enter ENTRY CODE on the last six (6) lines of this screen" 28 23 6 173 Literal "In order to VIEW CP568 Letter Online, Enter==>__ (V) and then ENTRY CODE Note: This line will be blank for Form 945"
Command Code FTDPN Output Explanation Display Delete Screen (Form 941 for tax period 199303 and subsequent)
Exhibit 2.3.28-16 Command Code FTDPN Output Explanation Display Delete Screen (Form 941 for tax period 199303 and subsequent) Response Screen This is an example of command code FTDPN output explanation display delete screen. Please click here for the text description of the image. Record Element Description Elem Line Scr Position Description Format 1 1 6 15 Command Code FTDPN 2 1 6 6 Command Code Definer B 3 1 6 2536 Literal "BASE-PRD-CD=" 4 1 6 37 BASE-PRD-CD n 5 1 6 4756 Edited TIN and File Source nn-nnnnnnn 6 1 6 6162 MFT nn 7 1 6 6469 TAX-PRD yyyymm 8 1 6 7379 SCREEN-JULIAN-DT yyyyddd 9 3 6 677 Literal "THIS INPUT SCREEN ALLOWS USER TO DELETE ANY PREVIOUS FTD LETTER REQUEST. " 10 5 6 675 Literal "ENTER EIN AND TAX-PRD OF FTD LETTER REQUEST TO BE OR \//////hXMIT\//////g TO" 11 6 6 636 Literal "DEFAULT TO CURRENT ACCOUNT OR ENTER" 12 6 6 37 DELETE-EXIT-IND x 13 6 6 3850 Literal "(X) TO EXIT." 14 7 6 611 Literal "EIN:" 15 7 6 1221 DELETE-EIN nn-nnnnnnn 18 7 6 2533 Literal "TAX PRD: " 19 7 6 3439 DELETE-TXPRD yyyymm 20 14 6 156 Literal "**NOTE: FTD LETTER REQUESTS CAN ONLY BE DELETED BY THE" 21 15 6 1156 Literal "EMPLOYEE WHO ORIGINALLY REQUESTED THE LETTER." 22 17 6 1151 Literal "PRINT THIS SCREEN FOR FURTHER REFERENCE." 23 19 6 1160 Literal "ENTRY CODE MUST BE ENTERED AFTER OR BELOW TAX-PRD" 24 20 6 1149 Literal "INFORMATION TO PROCESS DELETE REQUEST."
Command Code FTDPN With Definer G Response (Tax Periods 199303 and subsequent)
Exhibit 2.3.28-17 Command Code FTDPN With Definer G Response (Tax Periods 199303 and subsequent) Response Screen FTDPNG This is an example of FTDPN with definer G response for tax periods 199303 and subsequent. Please click here for the text description of the image. Record Element Description Elem Line Position Description Format 1 1 15 Command Code FTDPN 2 1 6 Command Code definer B 3 1 1829 Literal BASE-PRD-CD= 4 1 30 BASE PERIOD CODE n 5 1 3233 STATE CODE MU 6 1 6162 Literal =STATE-CD 7 1 4756 Edited TIN & FS nn-nnnnnnn 8 1 6162 MFT nn 9 1 6467 TAX-PRD yyyymm 10 2 158 Literal See Note #1 11 3 528 Literal See Note #2 12 3 3042 Total Tax Liability z,zzz,zzz,zzz 13 3 4473 Literal See Note #3 14 4 1 1st month indicator A 15 4 324 Literal FIRST MONTH OF QUARTER 16 4 28 2nd month indicator B 17 4 3052 Literal SECOND MONTH OF QUARTER 18 4 55 3rd month indicator C 19 4 5778 Literal THIRD MONTH OF QUARTER 20 621 12, 1415, 2829, 4142, 5556, 6869 days of the month nn 21 621 312, 1625, 3039, 4352, 5766, 7079 Liability Amt. zzzzzz9.99** 22 23 136 Literal See Note #4 Note # 1: Use literal " GENERIC ACCOUNT: IF TOTAL LIABILITY FOR THE QUARTER IS TO" Note #2: Use literal "BE AVERAGED, ENTER TOTAL" Note #3: Use literal "ELSE, ENTER LIABILITIES BELOW:" Note #4: Use literal "ENTER ENTRY CODE STARTING THIS LINE." **due to spacing limitations, commas are not required in order to compute million dollar liability accounts.
Command Code FTDPN With Definer "G" Output Explanation Display (Form 941 for tax period 199303 and subsequent. This screen(s) displays the credits.
Exhibit 2.3.28-18 Command Code FTDPN With Definer "G" Output Explanation Display (Form 941 for tax period 199303 and subsequent. This screen(s) displays the credits. Response Screen FTDPNG This is an example of FTDPNG output explanation display for form 941 for tax period 199303 and subsequent. Please click here for the text description of the image. Record Element Description Elem Line Scr Position Description Format 1 1 1+ 17 Literal FTDCOMP or FTDPNB 2* 1 1+ 2536 Literal BASE-PRD-CD 3* 1 1+ 37 BASE-PRD-CD n 4 1 1+ 4756 Edited TIN and File Source nn-nnnnnnn 5 1 1+ 6162 MFT nn 6 1 1+ 6469 TAX-PRD yyyymm 7 1 1+ 7379 SCREEN-JULIAN-DT yyyyddd 8 2 1+ 61 Literal W-IND= 9 2 1+ 67 FTD-waiver-ind n valued 'Y' or 'N' 10 2 6972 EFTPS-ELEC-DPST-IND yyyy 11 2 7379 Literal =EFT-YR 12 2 2+ 116 Literal GENERIC ACCOUNT: 13 3 2+ 135 Literal See Note #1 14 3 2+ 3851 CREDITS-TOTAL zzzzzzzzzz9.99 15 3 2+ 6977 Literal STATE-CD 16 3 2+ 7879 STATE-CD nn 17 4 2+ 159 Literal See Note #2 18 622 2+ 14 2830 5557 Transaction nnne (See Amendment #1) 18 622 2+ 512 3239 5966 Trans-Date mmddyyyy 20 622 2+ 1426 4153 6880 Trans-Amount $$$$$$$$$$$$$$ NOTE #1 Use literal " TOTAL AMOUNT OF CREDIT TRANSACTIONS" . NOTE #2 Use literal "To Designate, Enter L## (L=Indicator ##=Incurred Liability Number)" . *NOTE: Only present for tax periods greater than 199212 (all screens).
Command Code FTDPN With Definer B Text input Display (Form 941 for tax period 199303 and subsequent)
Exhibit 2.3.28-19 Command Code FTDPN With Definer B Text input Display (Form 941 for tax period 199303 and subsequent) Response Screen This is an example of the Command Code FTDPN With Definer B Text input Display for Form 941 for tax period 199303 and subsequent. Please click here for the text description of the image. Record Element Description Elem Line Position Description Format 1 1 15 Command Code FTDPN 2 1 6 Command Code Definer B 3 1 2536 Literal "BASE-PRD-CD&ME" 4 1 37 BASE-PRD-CD n 5 1 4756 Edited Tin and File Source nn-nnnnnnn 6 1 6162 MFT nn 7 1 6469 TAX-PRD yyyymm 8 1 7174 Literal "STA =" 9 1 7576 STATE CODE (Deposit Made) XX 10 3 680 *Literal 11 4 180 *Literal 12 5 177 *Literal 13 6 174 *Literal 14 7 180 *underline 15 8 180 *underline 16 9 180 *underline 17 10 180 *underline 18 11 180 *underline 19 12 180 *underline 20 13 180 *underline 21 14 180 *underline 22 15 180 *underline 23 16 180 *underline 24 17 180 *underline 25 18 180 *underline 26 19 180 *underline 27 20 180 *underline 28 21 180 *underline 29 22 175 *Literal 30 23 172 *Literal Note: *Refer to Literal value to Exhibit 2.3.28-16.
Command Code FTDPN Information Display Screen (Form 941 and Form 945 for tax period 199303 and subsequent)
Exhibit 2.3.28-20 Command Code FTDPN Information Display Screen (Form 941 and Form 945 for tax period 199303 and subsequent) Response Screen FTDPN Display Screen for tax period 199303 and subsequent. Please click here for the text description of the image. Record Element Description Elem Line Position Description Format 1 1 15 Command Code FTDPN 2 1 6 Command Code Definer B 3 1 2536 Literal "BASE-PRD-CD&ME" 4 1 37 BASE-PRD-CD n 5 1 4756 Edited Tin and File Source nn-nnnnnnn 6 1 6162 MFT nn 7 1 6469 TAX-PRD yyyymm 8 1 7174 Literal "STA =" 9 1 7576 STATE CODE (Deposit Made) XX 10 3 680 *Literal 11 4 180 *Literal 12 5 177 *Literal 13 6 280 *Literal 14 7 280 *Literal 15 8 280 *Literal 16 9 280 *Literal 17 10 280 *Literal 18 11 280 *Literal 19 12 280 *Literal 20 13 280 *Literal 21 14 280 *Literal 22 15 280 *Literal 23 16 280 *Literal 24 17 280 *Literal 25 18 280 *Literal 26 19 280 *Literal 27 20 280 *Literal 28 21 280 *Literal 29 22 276 *Literal 30 23 180 *Underscore Note: *Refer to Literal value Exhibit 2.3.28-17. PARA CODE TEXT 011 - (Reasonable cause (cover page))012 - (Reasonable cause (expl-pages)) If you believe you have a reasonable cause for not making the deposits, please explain at the end of this letter and return it by August 30, 2004. A company officer or other authorized representative must sign the statement. The IRS will remove a penalty, or any portion of a penalty, if it is the result of written advice from the IRS. However, there are two conditions: you must have provided adequate and accurate information when you requested the advice and advice must have been given in response to a specific written request. 020 - (Penalty for late deposit) We charged a penalty because, according to our records you did not make your tax deposit on time or in the correct amount.Form 944: For employers who are in the Employers' Annual Federal Tax Program (Form 944) whose tax liability for the year equals or exceeds $2,500 but those employment tax liability for a quarter of the year is deminimis (less than $2,500) will be deemed to have timely deposited the employment taxes due for that quarter if you fully deposit the employment taxes accumulated during that quarter by the last day of the month following the close of that quarter. Employment taxes accumulated for less than $2,500 during the fourth quarter can be either deposited by January 31 or remitted with a timely filed return for the return period. 023 (Penalty Waived) We waived the 10 percent penalty for the deposit not made by EFTPS. 030 - ( all penalty rates/days late) The amount of the penalty is determined by how late the deposit was made. In addition, credits are applied to the most recent period or periods within the specified tax period to which the credit relates. Your penalty rate is figured as follows: 2 percent for deposits made 1 to 5 days late. 5 percent for deposits made 6 to 15 days late. 10 percent for deposits made 16 or more days late, but within 10 days of the date of the first notice we sent you asking for the tax due. 15 percent for amounts still unpaid more than 10 days after the date of the first notice we sent you asking for tax due. 10 percent for deposits made at unauthorized financial institutions. 10 percent avoidance penalty for deposits not made through EFTPS as required by law. After 12/31/2010 the paragraph will read The amount of the penalty is determined by how late the deposit was made. In addition, credits are applied to the most recent period or periods within the specified tax period to which the credit relates. Your penalty rate is figured as follows: 2 percent for deposits made 1 to 5 days late. 5 percent for deposits made 6 to 15 days late. 10 percent for deposits made 16 or more days late, but within 10 days of the date of the first notice we sent you asking for the tax due. 15 percent for amounts still unpaid more than 10 days after the date of the first notice we sent you asking for tax due. 10 percent avoidance penalty for deposits not made through EFTPS. 031 - 2% ( 1 to 5 days late) The amount of the penalty is determined by how late the deposit was made. In addition credits are applied to the most recent period or periods within the specified tax period to which the credit relates. Your penalty rate is figured at a 2 percent for deposits made 1 to 5 days late. 032 - 5% (6 to 15 days late) The amount of the penalty is determined by how late the deposit was made. In addition credits are applied to the most recent period or periods within the specified tax period to which the credit relates. Your penalty rate is figured at a 5 percent for deposits made 6 to 15 days late. 033 - 10% (16 or more days late) The amount of the penalty is determined by how late the deposit was made. In addition credits are applied to the most recent period or periods within the specified tax period to which the credit relates. Your penalty rate is figured at a 10 percent for deposits made 16 or more days late, but within 10 days of the date of the first notice we sent you asking for the tax due. 034 - 15% 10 days later after 1st notice The amount of the penalty is determined by how late the deposit was made. In addition credits are applied to the most recent period or periods within the specified tax period to which the credit relates. Your penalty rate is figured at 15 percent for amounts still unpaid more than 10 days after the date of the first notice we sent you asking for the tax due. 240 - No penalty due, within tolerance Dear Taxpayer; Thank you for your reply, dated mm dd, yyyy to our letter proposing a federal tax deposit penalty on your Form 941/Form 945/Form 944 for the period ending mm dd, yyyy. Based on the information you provided we have determined that no penalty is due. 036 - 10% (avoidance or EFT compliance) The amount of the penalty is determined by how late the deposit was made. In addition credits are applied to the most recent period or periods within the specified tax period to which the credit relates. Your penalty rate is figured at 10 percent avoidance penalty for deposits not made through EFTPS as required by law. 040 - 10% (unauthorized deposit) The penalty was charged because, according to our records, you paid your taxes to an unauthorized financial institution, directly to the IRS, or with your return. The penalty is 10 percent of each payment not properly deposited. There is a limit to the amount of tax you may pay with your return. On the Form 941/Form 945 series/Form 944, if your total accumulated taxes for the return period are less than $2500, you may pay this amount with your return. After 12/31/2010 the paragraph for quarterly returns will read The penalty was charged because, according to our records, you paid your taxes to an unauthorized financial institution, directly to the IRS, or with your return. The penalty is 10 percent of each payment not deposited electronically through the Electronic Federal Tax Payment System (EFTPS). There is a limit to the amount of tax you may pay with your return. On the Form 941 series, you can pay your total Form 941 tax liability when you timely file the form if both: * Your total Form 941 tax liability for either the quarter or the preceding quarter or the preceding quarter is less than $2,500 , and * You did not incur a $100,000 next day deposit obligation during the quarter. After 12/31/2010 the paragraph for annual returns will read The penalty was charged because, according to our records, you paid your taxes directly to the IRS, or with your return. The penalty is 10 percent of each payment not deposited electronically through the Electronic Federal Tax Payment System (EFTPS). There is a limit to the amount of tax you may pay with your return. If your total accumulated taxes for the return period are less than $2500, you may pay this amount with your return. 050 - Averaging Total Tax Liability We charged a penalty because we could not determine if your deposits were made timely or in sufficient amounts. We arrived at this conclusion because your record of Federal Tax Liability was incomplete or illegible, or the liability amounts you reported did not equal the net taxes for the tax period. Therefore, we averaged the total tax liability (reported on Form 944) and distributed it equally throughout the tax period. We applied your deposits and payments to the averaged liabilities in the date order we received your deposits. We figured the penalty on any tax not deposited on time or in the correct amount. 060 - Deposit (s) applied in date order We applied your deposits and payments in the date order we received them. We used your Record of Federal Tax Liability to determine where to apply your deposits. We figured the penalty on any tax not deposited, deposited late, or not deposited in the correct amounts. 070 - Send Form 945-A/ Send Schedule B If you believe we computed the penalty incorrectly, please send us a complete breakdown of your tax liability by filling in Form 945-A/ schedule B (Annual Record of Federal Tax Liability ) for tax years 1993 and later.Form 944: If you believe we computed the penalty incorrectly, please send us a complete breakdown of your Form 944 tax liability by filling in Form 945-A, Annual Record of Federal Tax Liability. 080 - Semi-weekly, send schedule B Our records show you are a semi-weekly depositor but your Form 945-A Annual Record of Federal Tax Liability , Schedule B, Employers Record of Federal Tax Liability, did not have enough information on it for us to determine if you made your deposits on time or in the correct amounts.Our records show you are a semi-weekly depositor for Form 944, but your Form 945-A,Annual Record of Federal Tax Liability , did not have enough information on it for us to determine if you made your deposits on time or in the correct amounts. 090 - Monthly, send schedule B Our records show you are a monthly depositor but your Monthly Summary of Federal Tax Liability did not have enough information on it for us to determine if you made deposits on time or in the correct amounts. 100 - Explains Semi-weekly rule Our records indicate that you are a semi-weekly depositor. You should be following the semi-weekly deposit schedule because your total Form 945/Form 941 - tax liability in your look back period was more than $50,000. Therefore, your deposits should be made according to the following schedule: If you pay wages on Wednesday, Thursday, or Friday the Deposit is due by the following Wednesday. If you pay wages on Saturday, Sunday, Monday, or Tuesday, the Deposit is due by the following Friday. 110 - Explains Monthly rule Our records indicate that you are a monthly depositor. You should be following the monthly deposits schedule because your total Form 945/employment tax liability in your look back period was $50,000 or less. For liabilities accumulated within any one monthly period, your deposit is due the first banking day on or after the 15th of the following month. 120 - $100,000 one day requirement If, during any month, your accumulated Federal Taxed reach $100,000 or more, you must make a deposit on the next banking day. This one-day deposit requirement overrides any other deposit rule. For the remainder of the year you must follow the semi-weekly deposit schedule. 130 - $100,000 on Monthly Your requirements changed from monthly to semi-weekly, Monthly depositors who reach a liability of $100,000 or more within any one month immediately become semi-weekly depositors for the remainder of the current year and for the following calendar year. 140 - Lookback period rule Your deposit schedule for the calendar year is determined from the total taxes in a four quarter/Form 945 taxes in the lookback period. The lookback period is the second calendar year preceding the current calendar year. For example: the lookback period for the year 2000 is 1998.Form 944: Your deposit schedule for the calendar year is determined from the total Form 944 taxes reported in the look back period. The look back period is the second calendar year preceding the current calendar year. For example: the look back period for the year 2008 is 2006. 151- Safe Harbor, Monthly The regulations provide a safe harbor exception for any deposit where unusual or unforeseen circumstances prevent you from timely depositing 100% of your liability. If you deposit at least 98% of your tax liability by the deposit due date, and the shortfall does not exceed the greater of $100 or 2 percent of the required deposit, you have met the deposit requirement for that liability. For a monthly depositor, any shortfall amount must be remitted or deposited by the return due dates. 152 - Safe Harbor, Semi-weekly The regulations provide a safe harbor exception for any deposit where unusual or unforeseen circumstances prevent you form timely depositing 100% of your liability. If you deposit at least 98% of your tax liability by the deposit due date, and the shortfall does not exceed the greater of $100 or 2 percent of the required deposit, you have met the deposit requirement for that liability. 170 - Deposit (s) not immediate credit We charged you with the penalty for not making federal tax deposits on time because your deposit was not considered an immediate credit item by your bank. Each Federal Reserve Bank has its own guidelines for what it considers an immediate credit item. Therefore, you should contact the Treasury Tax and Loan or Federal Tax Department at your bank to resolve any difference between the date stamped on your receipt and the date your check was cancelled. 181- In future complete Monthly ROFT In the future, please complete all applicable entries in the Form 945-A (Annual Record of Federal Tax Liability) / in the Record of Federal Tax Liabilities section of your tax return on the Monthly Summary of Federal Tax Liability. Show the amount of tax liability (not the deposit amount) for each period in which you paid wages to employees. 182 - In future complete schedule B In the future, please complete all applicable entries in the Form 945-A (Annual Record of Federal Tax Liability) / in the Record of Federal Tax Liabilities section of your tax return on the Form 941 Schedule B (Employers Records of Federal Tax Liability). Show the amount of tax liability (not the deposit amount) for each period in which you paid wages to employees. Form 944: In the future, please complete and include with your Form 944 the Form 945-A, Annual Record of Federal Tax Liability. Show the amount of tax liability (not the deposit amount) for each period in which you paid wages to employees. 190 - Not consider immediate credit Apparently, your deposit was processed under normal Federal Reserve Bank procedures. However, the bank did not consider your deposit (s) an immediate credit item. When this is the case, we must charge you the penalty for not making federal tax deposits. Your bank can explain which checks it considers immediate credit items. 200 - Review schedule records The schedule you provided indicates you are reporting wages for the pay period in which they are earned, rather than the date they are actually paid. This situation will cause your deposits to appear late. Please review your records, and if this is the case, please complete and return the enclosed Form 945-A, Annual record of Federal Tax Liabilities/Form 941, Schedule B, Employers Record of Federal Tax Liabilities. Return the Form 945-A/Form 941, Schedule B, along with a copy of this letter, to the address at the top of the first page of this letter, so we may correct our records and adjust your penalty accordingly. Form 944: The schedule you provided with your Form 944 indicates you are reporting wages for the pay period in which they are earned, rather than the date they are actually paid. This situation will cause your deposits to appear late. Please review your records, and if this is the case, please complete and return the enclosed Form 945-A, Annual Record of Federal Tax Liabilities. Return the Form 945-A, along with a copy of this letter, to the address at the top of the first page of this letter, so we may correct our records and adjust your penalty accordingly. 211 - Open text on cover page Input your text for cover page. 212 - Open text on expl-pages Input your text on expl-page. 220 - Attachments line (Cover page) ATTACHMENTS: Form 945, Schedule B (Employer Record of Federal Tax Liability). 230 - Explanations RRA 98 3304 (a) & (b) Our records indicate that you were issued a notice for the tax period ending mm dd, yyyy, That included a Federal Tax Deposit (FTD) penalty assessment for late paid deposits. The Internal Revenue Service Restructuring and Reform Act of 1998 (RRA 98) Section 3304 (a) and (b) allow you provisions for decreasing an FTD penalty assessment related to deposits required after January 18, 1999. The notice issued included an FTD penalty computed under section 3304 (c) where deposits are applied to the most recent period or periods within the specified tax period to which the deposit relates. The IRS issued Revenue procedure 99-10 that allows taxpayers to designate the application of federal tax deposit for a particular return period, in order to minimize the FTD penalty under section 6656. The procedure applies to deposits required after January 18, 1999. Section 3304 (a) allows taxpayers 90 days from the date of the penalty notice to contact the IRS and designate the deposit period or periods within a tax return period to which the deposits of tax are to be applied. The IRS will adjust the penalties and notify you of the new penalty amount in writing. Section 6656 of the Internal Revenue Code (IRC) provides that in the case of any failure by any person to deposit (as required by the IRC or regulations) on the date prescribed any amount of tax in a government depository, there will be imposed upon such person a penalty equal to the applicable percentage of the amount of the underpayment, unless it is shown that such failure is due to reasonable cause and not due to willful neglect. The penalty ranges from 2 to 15 percent depending upon the lateness of the deposit. Section 6656 (c) (2) (B) provides a waiver after the taxpayer is required to change the frequency of their deposits. The penalty relief is allowed provided you meet the net worth requirement ($2,000,000 or less for individuals, $7,000,000 or less for any owner or an unincorporated business, any partnership, corporation, association, unit of local government, or organization) and file a timely employment tax return. The relief provided by Section 6656 (c) (2) (B) is effective for deposits required after January 18, 1999. If you qualify for relief under either of these sections, please return this letter with your supporting information, or call the telephone number shown above for assistance. We apologize for the delay in notifying you of this penalty relief provision.
Command Code FTDPN With Definer G Definer-Input
Exhibit 2.3.28-21 Command Code FTDPN With Definer G Definer-Input Input Screen FTDPNG for Tax Periods starting 199312 to present for Form 941 (MFT 01). And Tax Periods starting 199412 to present for Form 943 and Form 945 (MFT 11 and 16). Tax Periods starting 200412 to present for Form CT-1, Tax Periods starting 200612 for Form 1042 and Form 944 Command Code FTDPN Definer G input screen. Please click here for the text description of the image. Record Element Description Elem Line Position Description Format 1 1 15 Command Code FTDPN 2 1 6 Command Code Definer G 3 1 716 EIN nn-nnnnnnn 4 2 12 MFT 01, 11, 16 5 2 49 Tax Period yyyymm
Command Code FTDPN With Definer G Display response (Form 943 and Form 945 starting Tax Periods: 199412 and subsequent. Form 1042 and Form 944: 200612 and subsequent.)
Exhibit 2.3.28-22 Command Code FTDPN With Definer G Display response (Form 943 and Form 945 starting Tax Periods: 199412 and subsequent. Form 1042 and Form 944: 200612 and subsequent.) Response Screen FTDPNG Response Screen for Command Code FTDPN with Definer G. Please click here for the text description of the image. Record Element Description Elem Line Position Description Format 1 1 1 Command Code FTDPN 2 1 6 Command Code definer B 3 1 2536 Literal BASE-PRD-CD= 4 1 37 BASE PERIOD CODE * 5 1 4756 Edited TIN and File Source nn-nnnnnnn 6 1 6162 MFT nn 7 1 6469 TAX-PRD yyyymm 8 2 140 Literal See Note #1 9 2 5163 TOTAL z,zzz,zzz,zzz 10 521 14 date mmdd 21-24 4144 11 521 5, 25,45 Average-Ind. See Note #2 12 521 618 Liability Amt. zzzzzzzz9.99** 26-38 46-57 13 5-17 63-64 Literal 01 - 12 14 5-17 66-78 Monthly amount zzz,zzz,zz9.99 15 22 153 Literal See Note #3 16 22 153 Literal See Note #4 Note #1: Use literal "GENERIC ACCOUNT: ENTER TOTAL AVERAGED AMOUNT" Note #2: When computing a BASE-PRD-CD of 1 (Monthly), CC FTDPN can now accept a new indicator "A" . The value of "A" signify that the monthly amount will be averaged into 4 and assigned the first four Wednesday of the month as the Incurred Liability Date. Users can use this manual enhancement if they are to average Monthly amounts rather than using the Total Tax Liability amount, this applies to Monthly account that needs averaging computation. Note #3: Use literal "For a summary of the breakdown page(s), Enter_(Y): " Note #4: Use literal "ENTER ENTRY CODE ON THIS LINE:" ** due to spacing limitations, commas are not required in order to compute million dollar liability accounts.
Command Code FTDPN With Definer B display response (Form 943 and Form 945 starting Tax Periods 199412 and subsequent. Form CT-1 starting Tax Periods 200412, Form 1042 and Form 944 starting Tax Periods 200612)
Exhibit 2.3.28-23 Command Code FTDPN With Definer B display response (Form 943 and Form 945 starting Tax Periods 199412 and subsequent. Form CT-1 starting Tax Periods 200412, Form 1042 and Form 944 starting Tax Periods 200612) Response Screen FTDPN Command Code FTDPN With Definer B display response screen Please click here for the text description of the image. Record Element Description Elem Line Position Description Format 1 1 15 Command Code FTDPN 2 1 6 Command Code definer B 3 1 2536 Literal BASE-PRD-CD= 4 1 37 BASE PERIOD CODE n 5 1 4756 Edited TIN and File Source nn-nnnnnnn 6 1 6162 MFT nn 7 1 6469 TAX-PRD yyyymm 8 2 140 Literal See Note #1 9 2 5163 TOTAL z,zzz,zzz,zzz 10 3 528 Literal See Note #2 11 3 3042 Total Tax Liability z,zzz,zzz,zzz 12 3 4473 Literal See Note #3 13 3 5163 Total-credit-used z,zzz,zzz,zzz 14 3 6878 Literal See Note #4 15 3 7980 State-cd nn 16 4 155 Literal See Note #5 17 521 1-4 date mmdd 21-24 41-44 18 521 5,25,45 Average-Ind See Note #6 19 521 6-18 Liability Amt. zzzzzzzz9.99** 26-38 45-57 20 5-17 63-64 Literal 01-12 21 5-17 66-78 Monthly amount zzz,zzz,zz9.99 22 22 153 Literal See Note #7 23 23 133 Literal See Note #8 24 23 3446 Amt-to-penalty z,zzz,zzz,zzz 25 23 4861 Literal See Note #9 26 23 6274 Total-penalty z, zzz, zzz, zzz note #8 Note #1: Use literal "GENERIC ACCCOUNT: ENTER TOTAL AVERAGED AMOUNT" Note #2: Use literal "TOTAL ROFT" Note #3: Use literal "TOTAL CREDIT USED" Note #4: Use literal "STATE CD=" Note #5: Use literal "TAX LIABILITIES ON THE POST RETURN OR OPERATOR INPUT:" Note #6: When computing a BASE-PRD-CD of 1 (Monthly), CC FTDPN can now accept a new indicator "A" . The value of "A" signify that the monthly amount will be averaged into 4 and assigned the first four Wednesday of the month as the Incurred Liability Date. Users can use this manual enhancement if they are to average Monthly amounts rather than using the Total Tax Liability amount, this applies to Monthly account that needs averaging Computation. Note #7: Use literal "For a summary of the breakdown page(s), Enter_(Y): " Note #8: Use literal "TOTAL AMT SUBJECT TO FTD PENALTY" Note #9: Use literal "TOTAL PENALTY" ** due to spacing limitations, commas are not required in order to compute million dollar liability accounts.
Command Code FTDPN with Definer B Credit Output Explanation Display (Form 943 and Form 945 only for Tax Periods starting 199412 and subsequent)
Exhibit 2.3.28-24 Command Code FTDPN with Definer B Credit Output Explanation Display (Form 943 and Form 945 only for Tax Periods starting 199412 and subsequent) Response Screen Command Code FTDPN with Definer B Credit Output Explanation Display for Form 943 and Form 945 only for Tax Periods starting 199412 and subsequent. Please click here for the text description of the image. Record Element Description Elem Line Scr Position Description Format 1 1 1+ 17 Literal FTDCOMP or FTDPNB 2* 1 1+ 2536 Literal BASE-PRD-CD 3* 1 1+ 37 BASE-PRD-CD n 4 1 1+ 4756 Edited TIN and File source nn-nnnnnnn 5 1 1+ 6162 MFT nn 6 1 1+ 6469 TAX-PRD yyyymm 7 2 2+ 116 Literal GENERIC ACCOUNT: 8 2 1+ 61 Literal W-IND= 9 2 1+ 67 FTD-waiver-ind n value 'Y' or 'N' 10 2 2+ 6972 EFTPS-MANDATED YEAR CCYY 11 2 2+ 7379 Literal =EFT-YR 12 3 2+ 135 Literal See Note #1 13 3 2+ 3851 CREDITS-TOTAL zzzzzzzzzz9.99 14 3 2+ 6977 Literal STATE-CD 15 3 2+ 7879 STATE-CD nn 16 4 2+ 159 Literal See Note #2 17 521 2+ 14 Transaction nnne 18 521 2+ 512 Trans-Date mmddyyyy 19 622 2+ 1426 Trans-Amount $$$$$$$$$$$$$$ 4153 6880 22 23 2+ 170 Literal See note 3 NOTE #1 Use literal TOTAL AMOUNT OF CREDIT TRANSACTIONS. NOTE #2 Use literal "TC/E DATE TRANS-AMOUNT TC/E DATE TRANS-AMOUNT TC/E DATE TRANS-AMOUNT" . NOTE #3 Use literal "To designate, Enter L## (L=Indicator ##Incurred Liability Number" *NOTE: Only present for tax periods greater than 199412 (all screens).
Command Code FTDPN / FTDMF With Summary Screen Display (Form 941 for Tax Periods Starting 201306 and subsequent)
Exhibit 2.3.28-25 Command Code FTDPN / FTDMF With Summary Screen Display (Form 941 for Tax Periods Starting 201306 and subsequent) This is an example of the Summary Screen This is an example of the third Response screen for FTDPN / FTDMF . Please click here for the text description of the image. Record Element Description Elem Line Scr Position Description Format 1 1 3+ 1 Literal FTDCOMP 2 1 3+ 25 Literal BASE-PRD-CD 3 1 3+ 37 BASE-PRD-CD n 4 1 3+ 47 Edited Tin and File Source nn-nnnnnnn 5 1 3+ 61 MFT nn 6 1 3+ 64 TAX-PRD yyyymm 7 1 3+ 73 SCREEN-JULIAN-DT yyyyddd 8 3 3+ 1 Literal Deposit 9 3 3+ 10 Literal Semi-weekly / Daily/ Monthly 10 3 3+ 45 Literal Subject to 11 3 3+ 59 Literal Days 12 3 3+ 74 Literal Deposit 14 4 3+ 3 Literal Event 15 4 3+ 20 Literal Date 16 4 3+ 34 Literal AMOUNT 17 4 3+ 47 Literal Penalty 18 4 3+ 59 Literal Late 19 4 3+ 66 Literal Rate 20 4 3+ 74 Literal PENALTY 21 5 3+ 1 Literal -------- 22 6+ 3+ 1 Liability number nnb (01)... 23 6+ 3+ 4 Literal Liability 24 6+ 3+ 17 Liability Date MM-DD-YY 25 6+ 3+ 30 Liability Amount zzz,zzz,zzz.zz 26 7+ 3+ 4 Literal PR End Date/Due Date/ SF Due Date 27 7+ 3+ 17 Due Date MM-DD-YY 28 8+ 3+ 4 Literal Deposit(EFT)/ Deposit(neft)/ Deposit/ No Deposit/ Payment/ Excess Pymt 29 8+ 3+ 17 Deposit Date MM-DD-YY 30 8+ 3+ 25 SPLIT NUMBER (nnn) 31 8+ 3+ 30 DEPOSIT AMOUNT zzz,zzz,zzz.zz 32 8+ 3+ 45 SUBJECT TO PENALTY zzz,zzz,zzz.zz 33 8+ 3+ 60 DAYS LATE nnn 34 8+ 3+ 64 RATE nn% nn = 2, 5, 10, or 15 35 8+ 3+ 67 DEPOSIT PENALTY zzz,zzz,zzz.zz
Command Code FTDPN / FTDMF With Summary Screen Display (Form 943 and 945 for Tax Periods Starting 201306 and subsequent)
Exhibit 2.3.28-26 Command Code FTDPN / FTDMF With Summary Screen Display (Form 943 and 945 for Tax Periods Starting 201306 and subsequent) Third Response Screen for FTDPN / FTDMF This is an example of the third Response screen for FTDPN. Please click here for the text description of the image. Record Element Description Elem Line Scr Position Description Format 1 1 3+ 1 Literal FTDCOMP 2 1 3+ 25 Literal BASE-PRD-CD 3 1 3+ 37 BASE-PRD-CD n 4 1 3+ 47 Edited Tin and File Source nn-nnnnnnn 5 1 3+ 61 MFT nn 6 1 3+ 64 TAX-PRD yyyymm 7 1 3+ 73 SCREEN-JULIAN-DT yyyyddd 8 3 3+ 1 Literal FAILURE TO DEPOSIT - IRC SECTION 6656 9 4 3+ 1 Literal DEPOSIT: 10 4 3+ 10 Literal Semi-weekly / Daily/ Monthly 11 4 3+ 48 Literal Days 12 3 3+ 62 Literal Deposit 13 4 3+ 70 Literal Explanation 14 5 3+ 3 Literal Event 15 5 3+ 20 Literal Date 16 5 3+ 34 Literal Amount 17 5 3+ 48 Literal Late 18 5 3+ 54 Literal Rate 19 5 3+ 62 Literal Penalty 20 5 3+ 74 Literal Code 21 6 3+ 1 Literal -------- 22 8+ 3+ 1 Liability number nnnb ... 23 8+ 3+ 5 Literal Liability 24 8+ 3+ 18 Liability Date MM-DD-YYYY 25 8+ 3+ 33 Liability Amount zzz,zzz,zzz.zz 26 9+ 3+ 5 Literal PR End Date/Due Date/ SF Due Date 27 10+ 3+ 18 Due Date MM-DD-YYYY 28 11+ 3+ 5 Literal Deposit(EFT) /Deposit(NEFT) Deposit /No Deposit /Payment /Excess Crt /Excess Pymt 29 11+ 3+ 18 Deposit Date MM-DD-YYYY 30 11+ 3+ 28 SPLIT NUMBER (nnn) 31 11+ 3+ 33 DEPOSIT AMOUNT zzz,zzz,zzz.zz 32 11+ 3+ 50 DAYS LATE nnn 33 11+ 3+ 54 RATE nn% nn = 2, 5, 10, or 15 34 11+ 3+ 57 DEPOSIT PENALTY zzz,zzz,zzz.zz 35 11+ 3+ 75 Explanation Code nn
Command Code FTDPN / FTDMF With Summary Screen Display (Form 940 and 944, 1042 and CT-1 ) Starting July 1,2013 and subsequent
Exhibit 2.3.28-27 Command Code FTDPN / FTDMF With Summary Screen Display (Form 940 and 944, 1042 and CT-1 ) Starting July 1,2013 and subsequent Third Response Screen for FTDPN / FTDMF This is an example of the third Response screen from FTDPN. Please click here for the text description of the image. Record Element Description Elem Line Scr Position Description Format 1 1 3+ 1 Literal FTDCOMP 2 1 3+ 25 Literal BASE-PRD-CD (Note 1) 3 1 3+ 37 BASE-PRD-CD n (Note 1) 4 1 3+ 47 Edited Tin and File Source nn-nnnnnnn 5 1 3+ 61 MFT nn 6 1 3+ 64 TAX-PRD yyyymm 7 1 3+ 73 SCREEN-JULIAN-DT yyyyddd 8 3 3+ 1 Literal FAILURE TO DEPOSIT - IRC SECTION 6656 9 4 3+ 1 Literal DEPOSIT: 10 4 3+ 10 Literal Semi-weekly / Daily/ Monthly 11 4 3+ 48 Literal Days 12 3 3+ 62 Literal Deposit 13 4 3+ 70 Literal Explanation 14 5 3+ 3 Literal Event 15 5 3+ 20 Literal Date 16 5 3+ 34 Literal Amount 17 5 3+ 48 Literal Late 18 5 3+ 54 Literal Rate 19 5 3+ 62 Literal Penalty 20 5 3+ 74 Literal Code 21 6 3+ 1 Literal -------- 22 8+ 3+ 1 Liability number nnnb ... 23 8+ 3+ 5 Literal Liability 24 8+ 3+ 18 Liability Date MM-DD-YYYY 25 8+ 3+ 33 Liability Amount zzz,zzz,zzz.zz 26 9+ 3+ 5 Literal PR End Date/Due Date/ SF Due Date 27 10+ 3+ 18 Due Date MM-DD-YYYY 28 11+ 3+ 5 Literal Deposit(EFT) /Deposit(NEFT) Deposit /No Deposit /Payment /Excess Crt /Excess Pymt 29 11+ 3+ 18 Deposit Date MM-DD-YYYY 30 11+ 3+ 28 SPLIT NUMBER (nnn) 31 11+ 3+ 33 DEPOSIT AMOUNT zzz,zzz,zzz.zz 32 11+ 3+ 50 DAYS LATE nnn 33 11+ 3+ 54 RATE nn% nn = 2, 5, 10, or 15 34 11+ 3+ 57 DEPOSIT PENALTY zzz,zzz,zzz.zz 35 11+ 3+ 75 Explanation Code nn NOTE #1: Spaces to MFT 10, 12 and 09 NOTE #2: Spaces to MFT 10 and 12
Command Code FTDPN/FTDMF With Definer B Form 1042 starting Tax Periods 201412)
Exhibit 2.3.28-28 Command Code FTDPN/FTDMF With Definer B Form 1042 starting Tax Periods 201412) Response Screen for FTDPN / FTDMF This is an example of the third Response screen from FTDPN. Please click here for the text description of the image. Record Element Description Elem Line Scr Position Description Format 1 1 3+ 1 Literal FTDCOMP 2 1 1 6 Command Code definer B 3 1 1 47 Edited TIN and File Source nn-nnnnnnn 5 1 1 61 MFT nn 6 1 1 64 TAX-PRD yyyymm 7 2 1 1 Literal IF TOTAL LIABILITY IS TO BE AVERAGED, ENTER TOTAL 8 2 1 51 Trans-Amount $$$$$$$$$$$$$ 9 3 1 5 Literal TOTAL TAX 10 3 1 19 Trans-Amount $$$$$$$$$$$$$ 11 3 1 33 Literal TOTAL CREDIT USED 12 3 1 54 Trans-Amount $$$$$$$$$$$$$ 13 4 1 1 Literal TAX LIABILITIES ON THE POSTED RETURN OR OPERATOR INPUT: 14 4 1 60 Literal MONTHLY TOTALS 15 5 1 1 Literal 0107 16 5 1 6 Trans-Amount $$$$$$$$$$$$$ 17 5 1 21 Literal 0115 18 5 1 26 Trans-Amount $$$$$$$$$$$$$ 19 5 1 41 Literal 0122 20 5 1 62 Literal 01 21 5 1 65 TOTAL-MONTHLY-Trans-Amount $$$$$$$$$$$$$ 22 6 1 1 Literal 0131 23 6 1 6 Trans-Amount $$$$$$$$$$$$$ 24 6 1 21 Literal 0207 25 6 1 26 Trans-Amount $$$$$$$$$$$$$ 26 6 1 41 Literal 0215 27 6 1 46 Trans-Amount $$$$$$$$$$$$$ 28 6 1 62 Literal 02 29 6 1 65 TOTAL-MONTHLY-Trans-Amount $$$$$$$$$$$$$ 30 7 1 1 Literal 0222 31 7 1 6 Trans-Amount $$$$$$$$$$$$$ 32 7 1 21 Literal 0229 33 7 1 26 Trans-Amount $$$$$$$$$$$$$ 34 7 1 41 Literal 0307 35 7 1 46 Trans-Amount $$$$$$$$$$$$$ 36 7 1 62 Literal 03 37 7 1 65 TOTAL-MONTHLY-Trans-Amount $$$$$$$$$$$$$ 38 8 1 1 Literal 0315 39 8 1 6 Trans-Amount $$$$$$$$$$$$$ 40 8 1 21 Literal 0322 41 8 1 26 Trans-Amount $$$$$$$$$$$$$ 42 8 1 41 Literal 0331 43 8 1 46 Trans-Amount $$$$$$$$$$$$$ 44 8 1 62 Literal 04 45 8 1 65 TOTAL-MONTHLY-Trans-Amount $$$$$$$$$$$$$ 46 9 1 1 Literal 0407 47 9 1 6 Trans-Amount $$$$$$$$$$$$$ 48 9 1 21 Literal 0415 49 9 1 26 Trans-Amount $$$$$$$$$$$$$ 50 9 1 41 Literal 0422 51 9 1 46 Trans-Amount $$$$$$$$$$$$$ 52 9 1 62 Literal 05 53 9 1 65 TOTAL-MONTHLY-Trans-Amount $$$$$$$$$$$$$ 54 10 1 1 Literal 0430 55 10 1 6 Trans-Amount $$$$$$$$$$$$$ 56 10 1 21 Literal 0507 57 10 1 26 Trans-Amount $$$$$$$$$$$$$ 58 10 1 41 Literal 0515 59 10 1 46 Trans-Amount $$$$$$$$$$$$$ 60 10 1 62 Literal 06 61 10 1 65 TOTAL-MONTHLY-Trans-Amount $$$$$$$$$$$$$ 62 11 1 1 Literal 0522 63 11 1 6 Trans-Amount $$$$$$$$$$$$$ 64 11 1 21 Literal 0531 65 11 1 26 Trans-Amount $$$$$$$$$$$$$ 66 11 1 41 Literal 0607 67 11 1 46 Trans-Amount $$$$$$$$$$$$$ 68 11 1 62 Literal 07 69 11 1 65 TOTAL-MONTHLY-Trans-Amount $$$$$$$$$$$$$ 70 12 1 1 Literal 0615 71 12 1 6 Trans-Amount $$$$$$$$$$$$$ 72 12 1 21 Literal 0622 73 12 1 26 Trans-Amount $$$$$$$$$$$$$ 74 12 1 41 Literal 0630 75 12 1 46 Trans-Amount $$$$$$$$$$$$$ 76 12 1 62 Literal 08 77 12 1 65 TOTAL-MONTHLY-Trans-Amount $$$$$$$$$$$$$ 78 13 1 1 Literal 0707 79 13 1 6 Trans-Amount $$$$$$$$$$$$$ 80 13 1 21 Literal 0715 81 13 1 26 Trans-Amount $$$$$$$$$$$$$ 82 13 1 41 Literal 0722 83 13 1 46 Trans-Amount $$$$$$$$$$$$$ 84 13 1 62 Literal 09 85 13 1 65 TOTAL-MONTHLY-Trans-Amount $$$$$$$$$$$$$ 86 14 1 1 Literal 0731 87 14 1 6 Trans-Amount $$$$$$$$$$$$$ 88 14 1 21 Literal 0807 89 14 1 26 Trans-Amount $$$$$$$$$$$$$ 90 14 1 41 Literal 0815 91 14 1 46 Trans-Amount $$$$$$$$$$$$$ 92 14 1 62 Literal 10 93 14 1 65 TOTAL-MONTHLY-Trans-Amount $$$$$$$$$$$$$ 94 15 1 1 Literal 0822 95 15 1 6 Trans-Amount $$$$$$$$$$$$$ 96 15 1 21 Literal 0831 97 15 1 26 Trans-Amount $$$$$$$$$$$$$ 98 15 1 41 Literal 0907 99 15 1 46 Trans-Amount $$$$$$$$$$$$$ 100 15 1 62 Literal 11 101 15 1 65 TOTAL-MONTHLY-Trans-Amount $$$$$$$$$$$$$ 102 16 1 1 Literal 0915 103 16 1 6 Trans-Amount $$$$$$$$$$$$$ 104 16 1 21 Literal 0922 105 16 1 26 Trans-Amount $$$$$$$$$$$$$ 106 16 1 41 Literal 0930 107 16 1 46 Trans-Amount $$$$$$$$$$$$$ 108 16 1 62 Literal 12 109 16 1 65 TOTAL-MONTHLY-Trans-Amount $$$$$$$$$$$$$ 110 17 1 1 Literal 1007 111 17 1 6 Trans-Amount $$$$$$$$$$$$$ 112 17 1 21 Literal 1015 113 17 1 26 Trans-Amount $$$$$$$$$$$$$ 114 17 1 41 Literal 1022 115 17 1 46 Trans-Amount $$$$$$$$$$$$$ 116 18 1 1 Literal 1031 117 18 1 6 Trans-Amount $$$$$$$$$$$$$ 118 18 1 21 Literal 1107 119 18 1 26 Trans-Amount $$$$$$$$$$$$$ 120 18 1 41 Literal 1115 121 18 1 46 Trans-Amount $$$$$$$$$$$$$ 122 19 1 1 Literal 1122 123 19 1 6 Trans-Amount $$$$$$$$$$$$$ 124 19 1 21 Literal 1130 125 19 1 26 Trans-Amount $$$$$$$$$$$$$ 126 19 1 41 Literal 1207 127 19 1 46 Trans-Amount $$$$$$$$$$$$$ 128 20 1 1 Literal 1215 129 20 1 6 Trans-Amount $$$$$$$$$$$$$ 130 20 1 21 Literal 1222 131 20 1 26 Trans-Amount $$$$$$$$$$$$$ 132 20 1 41 Literal 1231 133 20 1 46 Trans-Amount $$$$$$$$$$$$$ 134 21 1 1 Literal MMDD 135 21 1 6 Trans-Amount $$$$$$$$$$$$$ 136 21 1 21 Literal MMDD 137 21 1 26 Trans-Amount $$$$$$$$$$$$$ 138 21 1 41 Literal MMDD 139 21 1 46 Trans-Amount $$$$$$$$$$$$$ 140 22 1 1 Literal S=Summary Screen 141 22 1 19 Literal P=Print Screen(1042) 142 22 1 42 Literal Enter 143 22 1 50 Selection (S) 144 23 1 1 Literal TOTAL AMT SUBJECT TO FTD PENALTY: 145 23 1 35 Trans-Amount $$$$$$$$$$$$$ 146 23 1 50 Literal TOTAL PENALTY 147 23 1 64 Trans-Amount $$$$$$$$$$$$$
Source: official text